Woodworking power tools now have become essential in the carpentry field.
These power tools have always been helpful, from creating small decorative designs to complex and complicated wood cutting.
There are several types of saws available in the market for various wood cutting purposes. Still, in this article, we are chiefly going to discuss the best double bevel miter saw.
A double bevel miter saw is used widely in a woodworking shop. Whether you need it or not. Most carpenters keep it for convenience.
The multiple uses and high functionality of the double bevel miter saw make it the top-rated tool. It covers a wide range of cutting work.
The double bevel miter saws are the compound miter saws. They somehow also reduce the working efforts and save a lot of time.
Usually, carpenters and woodworkers do not have enough time to invest in a woodworking project because they have to meet the deadlines.
It is where the vital role of the double bevel miter saw takes place.
Here we have provided a complete information guide and detailed explanation of what a dual bevel miter saw is, how it works, and the key features.
Review Of The Top 10 Best Double Bevel Miter Saw In The Market
Here we will provide you with a list of the top 10 best double bevel miter saw just so that your decision-making process becomes easy.
You can easily select any one model out of these ten, which is entirely fitting with your requirements. It will also prevent you from spending unnecessarily.
1. Dewalt Dws716XPS
DeWalt DWS716XPS is a powerful miter saw using a 3800 rpm motor and 15amp for a fast and durable cutting experience.
It a double bevel 12-inch compound miter saw with an integrated XPS cut line positioning system that consists of an LED light for cut line indication that is free from any adjustments.
It has a tall sliding fence that potentially supports crown moldings that are up to 6-5/8 inch and base moldings that are up to 6-1/2 inch vertically.
The tool has a crosscut capacity of 2×8 inch lumber at 90 degrees and 2×6 inch lumber at 45 degrees.
The tool’s quality to double allows it to tilt the head towards the left or right direction with several positive stops at 0, 33.9, 45, and 48 degrees, both left and right.
This machine does not require additional efforts of flipping over the board or lumber to cut in the opposing direction.
The metal detent plate secures accurate cutting as well as increase productivity drastically.
This tool is too lightweight and portable, best for people doing a job at different sites. The highly visible and apparent bevel scale allows the operator to make bevel adjustments easily.
The upgraded belt-drive design and gearbox improves vertical cutting capability.
Additionally, the DWS716XPS double bevel compound miter saw includes a vertical clamp, 12-inch carbide-tipped blade, dust bag, and a wrench.
2. 12 Inch Tacklife Double Bevel Sliding Miter Saw
This 12-inch Tack-life sliding compound miter saw is perfect for cutting at different angles of -45, 0, and 45 degrees. This tool is extremely versatile for performing several cutting jobs.
It has a double linear sliding rail design that enables the operator to adjust the cutting angle to 45 degrees and 45 degrees.
The tool uses a high power motor of 3800RPM and 15amp for precise, accurate, and perfect cuts.
It also has a built-in laser technology that further provides an ease to the operator while cutting by illuminating light on the cutting line.
The tool comes with a strong 305mm and 40 tooth TCT tough blade for cutting plastic, soft and hardwood, and soft metal.
The complete extension table provides a larger surface area to keep and support the wood or any other material while cutting through it.
It also has a clamping system that makes sure that the material does not move out of its place.
Additionally, the 12-inch Tack-life sliding compound miter saw contains a large dust bag that keeps the environment clean by collecting the unnecessary sawdust and also includes a soft grip handle to add comfort.
3. TACK LIFE PMS03A
Tack-life double bevel sliding compound miter saw is the powerful equipment to wind up heavy loads of wooden work with a power of 3800Rpm motor and 15 Amp.
It results in rapid, smooth, and accurate cuts. The design of this tool is quite appealing and specialized and fit for technical and practical woodwork.
It has a professional level laser guide technology for perfect accuracy while you quickly cut through the material.
The machine is capable of creating deep angled cuts, for example, 105×330 m deep.
The double bevel ability allows you to cut 45 degrees left up to 2.36×12.99 inches and 45 degrees right up to 1.38×12.99 inches.
It has an ultra high grade and strong tungsten 40 tooth carbide-tipped blade that ultimately offers endless possibilities for you to cut smoothly through the material.
The motor provided with this miter saw works more efficiently than any other saw motor. It is powerful enough to cut through wood, metal, aluminum and other alloys.
However, the motor does not consume a large amount of voltage, which is the best part.
For your safety, the tool locks when it is out of position that reduces the chances of accidents.
However, the machine could give you a little tough time when it comes to setting up and running for the first time after you get it. But once you are done setting up, you are good to go.
4. TACKLIFE EMS01A
Tack-life compound sliding miter saw is the best power tool for home use. It has two high adjustable speeds that are 3200rpm and 4500rpm and works with a 15amp strong motor.
By pressing the switch, you can easily convert between these two speeds. Usually, the high speed is used for wood, and the low speed is used for metal and other materials.
The significant part is that this machine is equipped with three blades.
Two of them are the 10 inches 40T TCT blades for plastic and wood, while the other one is the multifunctional 10 inches 48T TCT blade for versatile use.
It ultimately provides a wide range of choices for your operations. It also has an iron blade guard, which is more durable than the plastic and transparent saws.
The blade guard can protect you from ugly incidents and mishaps. It has a laser guide system launched typically using a red light, illuminating and guiding you for precise and accurate cutting.
It can cut miter angles of about -45 degrees, 0 degrees, 45 degrees with several positive stops at 0, 15, 22.5, 30, and 40 degrees.
Similarly, the free bevel range from 0-45 degrees allows you to perform bevel cuttings for various purposes.
The sliding rails present in the saw allow the operator to cut across the entire length of the wooden piece’s width. It means you can easily cut large and complete pieces of wood.
The robust sliding compound miter saw is made up of stainless steel castings.
It also includes a large dust bag that collects the sawdust and other residue for a clean environment and better visibility.
The extension table will provide you with an additional area to put the wooden pieces on it while you cut through.
It will prevent the material from falling and coming in the way. The vice clamping system holds the material in place for accurate cuts.
5. 12 Inch Cruzer Miter Saw
The dual bevel sliding Cruzer miter saw, comes with robot arms for smoother and accurate perfect level cuts.
These control features make it the fastest dual bevel miter saw available in the market these days. Which means you would be able to wind your work up as fast as possible.
It has the latest technology available in it than any other miter saw. Usually, it comes in two blade sizes, 10″ and 12″.
It features a military-grade aluminum frame for massive duty projects.
It also has wide sliding fences that support any material pressed against it, especially crown moldings for up to 7-1/2″ vertically and 6-1/2″ base moldings.
It has a shadow line cutting guide that reflects and sheds a good cutting line on the wooden piece. The motor is 15amp, which results in substantial accurate cuts.
The miter cut capacity is 50 degrees left and 60 degrees right with several positive stops and ten miter detents.
The dual bevel capacity is 47 degrees left and 47 degrees right with seven positive stops and a front bevel release.
The machine correctly stops at the standard bevel angles and includes an override switch that makes the Cruzer miter saw one of the most high-speed machines.
6. DeWalt DHS790AT2
The DeWalt Flexvolt DHS790AT2 is a flexible yet highly functional and modern 12-inch dual bevel sliding compound miter saw.
This saw uses up to 120V. It is a cordless miter saw but holds the complete ability and power of a corded miter saw without any doubt.
It has a battery that charges the volts as soon as you change the tool.
The run time of this powerful cordless compound sliding miter saw is 289 cross cuts in 3-1/4″ baseboard moldings in a single charge.
However, it runs both on electricity as well as two 60V max batteries. The machine is powered by a 3800rpm brushless motor for completing the tasks faster than the brushed motors.
The cut line, blade positioning system present in the machine makes sure that you cut perfect accordingly.
The back fence design allows the machine to cut the material up to 16 inches thick.
The saw is compact and extremely portable for carrying it to different job sites. It weighs around 56lbs.
7. Dewalt Dhs790AB
The flex volt DHS790AB is a 12-inch double bevel sliding compound max miter saw that delivers ultimate ease, durability and accuracy to your cutting experience.
It provides the power and convenience of a corded power tool while offering a cordless tool’s portability.
The miter saw has a powerful 120V brushless motor. This motor is responsible for attaining a longer run time as compared to those brushed motors.
This motor’s average single charge run time is 289 cross cuts in 3-1/4″ baseboard moldings.
The maximum initial voltage of the battery is 20V. The battery automatically alters the voltage as soon as the tool is changed.
This miter saw also includes a 120V AC adaptor that provides flexibility. It also has a cut line, blade positioning system perfect for adjusting and performing the cuts.
The cordless miter saw is compact and weighs around 55 lbs.
8. Dewalt DHS790T2
Dewalt DHS790T2 is a cordless double bevel max miter saw. Typically, a cordless miter saw is used in remote areas and workers at different job sites.
Similarly, this cordless miter saw has all the potential, abilities and high functionalities of the corded miter saw.
This saw is an accurate tool that can be used in many situations, including crown moldings and vertical crosscuts.
The cordless miter saw has a fantastic build quality and works fine with its innovative technologies.
The brushless 120V motor makes the machine more efficient and allows it to cut through the material as accurately as possible.
It has an innovative battery design that alters the voltages according to the tool. It has a run time of 289 cross cuts of 3-1/4″ baseboard moldings in a single full charge.
However, the run time of the miter saw can be improved. You can also adjust the blade position in this miter saw for more refined and smoother cutting.
9. Milwaukee electric Tool 2734-21 HD
The Milwaukee electric 10-inch dual bevel sliding miter saw is extremely flexible and user friendly.
The M18 fuel design was created to provide facility and meet the needs of the professional carpenters.
It delivers a greater capacity as compared to an average 10-inch miter saw.
The electronic intelligence present in the miter saw allows upgraded transmission between the tools and the batteries.
The brushless motor is powerful enough to provide improved and better run-time along with longer life.
To quickly line up the cuts, the shadow cut line indicator is always available. The machine’s horizontal cutting capacity is 2×1″ at 90 degrees.
The vertical nested crown cutting capacity is 5-1/4,” and the vertical baseboard cutting capacity is 5-3/4″.
The tool has easy access to the blade to change it along with top and side carrying handles. It increases portability.
The miter saw can efficiently perform up to 400 cuts in a single charge. The kit also includes tall sliding fences for supporting the material.
It also has easy access to the bevel lever and nine dual bevel detents.
10. SkilSaw SPT88-01
Skilsaw SPT88-01 is a lightweight and compact 12-inch dual bevel sliding miter saw that weighs around 51 pounds.
It makes it very portable and mobile. It has launched a worm drive mechanism for increased power and durability to complete the project at any job site.
The 15 amp dual field motor complements the worm drive gear increasing the longevity and work efficiency.
It also has an LED light system that illuminates the light on the cutting line and increases the cuts’ accuracy.
It has a crosscut capacity of 4×14″. The dual bevel cutting capacity present for both right and left cuts enables the operator to be more flexible while cutting.
The miter saw has positive bevel stops at several standard angles from 0-45 degrees. It ultimately improves and increases the working ability.
It has a highly visible and clear bevel gauge with solid sliding rails for cutting across the entire length of the wooden piece’s width.
However, the fence extensions present in the miter saw can sometimes wobble left or right while working. The dust collection bag can also be improved.
What Is A Dual Bevel Miter Saw
There are various types and models of miter saws made available in the market and highly recommended by the woodworkers.
One of them is a dual bevel miter saw. It is a compound miter saw that can tackle the complexities of the cuts.
Selecting machinery for your use can make you go through some challenging experiences with many market choices.
Each of the options is better than the other. It is where the real fuss is created.
The daunting experience leads you to go through several options and due to panic, you may select the wrong item.
It is why we thought to provide you with some necessary information about a dual bevel miter saw and why it is needed.
Suppose you are a woodworker, whether beginner, intermediate, or professional, you work mainly with such projects.
The projects requiring you to make angle cuts in large wooden planes and boards or bevel cuts in both directions without flipping over than a dual bevel miter saw are the perfect options.
We have another type of bevel miter saw, and that is the single bevel miter saw. This kind of saw allows you to create angled cuts in two planes in either direction.
The direction of the amount could be left or right, for instance, working with picture frames and crown moldings.
However, the board then requires to be flipped over to create the cut in another direction.
But we are more focused on the double bevel miter saw, so let’s just know what it is.
What Is A Double Bevel Miter Saw
Double bevel miter saws are more professional than compound miter saws. They are highly functional and allows you to create several massive cuts.
Such miter saws save the extra effort of flipping over the board to make the stakes at the opposing end of the board.
The advantage of a double bevel miter saw is that it can tilt to both left and right direction so that eventually, you can create bevel cuts in both directions without flipping the board.
Such a miter saw is specifically designed and structured for such people who have complex and complicated wood projects.
Whether it be a home-based or a workshop based work, double bevel miter saw takes the lead. The best is an understatement for double bevel miter saw at this point.
What Does Dual-Bevel Mean
If you have just begun the wood cutting journey and are new to this field, you need to understand what a dual bevel means.
Initially, you should consider whether you should be purchasing it or not according to your requirements. It is worth considering quite smartly because a dual bevel miter saw is pricey.
Hence, until you are sure that you would require the dual bevel miter saw over any other miter saw, it might not be worth the expense.
A dual bevel miter saw can rotate and tilt in both directions, be it left or right. It means that you are flexible in terms of cutting large wooden pieces.
It is because you do not have to move and re-adjust the workpiece many times during cutting.
You can simply clamp the wooden workpiece firmly and then twist the dual bevel miter saw in the opposite direction while cutting to create bevels at both sides.
You also need to consider the fact that dual bevel miter saws are heavy. It is why they are not portable enough as compared to the other types of saws or models.
So before making a purchase, make sure you consider this if you work at different job sites.
Why Do You Need A Dual Bevel Miter Saw
It is a brilliant question to ask yourself why you need a dual bevel miter saw?
Before making the purchase, you should know if you need this saw because you will waste the money spent on the purchase if you don’t.
After all, it is quite expensive. However, the other picture of the story is that a dual bevel miter saw is one of the most versatile tools ever made.
It can create bevel cuts and miter cuts easily without giving a hard time to the operator.
The dual bevel miter saw has increased functionality that it can easily tackle the task of the standard miter saw and the compound miter saw.
The dual bevel miter saw will enable you to create cuts at various angles, such as from 0-45degrees and sometimes even 60 degrees.
A double bevel miter saw is also considered far ahead of a single miter saw.
Moreover, controlling the dual bevel miter saw is comparatively very easy because you do not have to worry about flipping over the board. Your primary focus remains the actual cutting.
The Dual Or Double Bevel Miter Saw
When it comes to the ultimate cutting experience and precision, the dual bevel miter saw is many ways better than the standard compound miter saw.
It is because both saws have several significant differences between them. Each saw is better in its area of the field.
It makes them both hold a prominent position to where ever they are needed. A compound miter saw can only create bevel cuts in a single direction and cannot tilt or rotate.
This feature might be pleasing for many woodworkers, but some other woodworkers might not be okay with it.
Similarly, to create vertical angled bevel cuts, the standard compound miter saw can only do it only in one direction.
It will automatically be flipping over the wooden workpiece to create a similar cut in the other direction.
However, while using a dual bevel, miter saw you would never require this extra effort. A double bevel miter saw can tilt the blade in both directions to create bevel cuts.
Bevel Vs Miter Saw
A bevel cut is a type of amount that is usually made by tilting the blade at a certain angle to cut.
To create a bevel cut, you have to cut along the wooden piece’s entire width, which is generally cutting diagonally against the wood’s thickness.
On the other hand, a miter cut is slightly different from the bevel cut. Usually, people get twisted between the differences between both types of cuts.
A miter cut is the type of amount formed by bringing down the blade vertically and cutting along the wood piece’s angle.
What Is A Bevel Cut And Miter Cut
Many people get confused between the bevel cut and the miter cut due to quite a similar appearance.
Many people also think that these types of cuts are the same. However, this is not the case.
A bevel cut and a miter cut are quite different, although their cutting process is almost similar. Usually, after cutting a bevel cut, people think of it as a miter cut and vice versa.
A bevel cut is unlike the miter cut. It typically goes along the vertical plane, but the miter cut goes along the horizontal plane.
A bevel cut is formed when you cut along the wooden piece’s edges with a tilted saw blade at any angle apart from a 90-degree angle.
On the contrary, when you cut along the entire length of the wooden piece’s width with a vertical position blade or just the chopping off of the rigid material at any angle other than the 90-degree angle, a miter cut is created.
What Is The Difference Between A Compound Miter Saw And A Miter Saw
A compound miter saw and a standard miter saw are two different types of miter saws that are commercially used and in home-based projects.
Here are a few differences between them so that you get a broader idea about why they stand out in their field of work.
A compound miter saw is the type of miter saw that can create bevel cuts easily.
The blade on the compound miter saw can tilt towards the left or right direction, precisely only one direction.
It is one of the most accurate tools used for cutting. They can also cut a variety of angles as required by your project.
A simple miter saw is a restricted woodworking tool. In terms of cutting various angles, tilting, and motion, it is restricted.
The miter saw cannot tilt to the left or right direction to create miter cuts or bevel cuts; instead, it is useful when working with picture frames and DIYs.
Any material or wood that is to be cut with the miter saw’s help is placed on the cutting table pressed against the fence to ensure accurate cuts.
Despite being restricted to create bevel or specific other angle cuts, it is still conducive for winding up many daily life tasks and DIYs.
What Is The Difference Between Single Bevel And Dual Bevel Miter Saw
The two saws, whether single bevel or dual bevel, are the types of a miter saw.
They are the most commonly used miter saws in the wooden workshop. Despite them being so useful and familiar, they hold a few differences.
These differences make the operator decide what type of saw he requires according to his requirements.
A dual bevel miter saw is comparatively the most versatile and high functional when creating angled cuts.
The head of the dual bevel miter saw can rotate in two directions, left and right.
It merely allows the operator to cut huge wooden pieces in different directions without really flipping the wooden board.
The dual bevel miter saw is also exact and accurate in selecting the bevel angle. It reduces and saves a lot of time.
Some high-end dual bevel miter saws also contain a thumb-activated stop system that adds ease and convenience for rapid adjustments.
On the other hand, a single bevel miter saw is a restricted tool. It cannot tilt its head in both directions, left or right, rather than it can tilt in only one direction at a time.
It eventually results in extra efforts to flipping over the workpiece to create cuts in the other direction.
Unlike a dual bevel, miter saw the single bevel miter saw is not flexible enough to create whatever angle cuts you want.
Single bevel miter saws also have an angled end on the fence towards the left side only.
Today despite all the innovation and development, a dual bevel miter saw is considered more sophisticated.
It tends to implement and utilize more technical features than most of the other models. Also, it is more applicable and relevant when it comes to creating complex and complicated angles.
Single Vs Dual-Bevel Miter, What’s Best For Your Needs
Whether single or dual bevel miter saw, it is essential to determine your requirement’s key features.
The determination process can be slightly tricking and contradictory because of the occupancy of many new and upgraded machines and models.
You may get puzzled upon for what model or the machine you should go to. However, selecting between a single bevel and dual bevel miter saw is the first essential step.
Still, for this, you have to make specific, thoughtful considerations regarding your projects’ needs.
Most people would be fine working with a single bevel miter saw because they might not have to deal with extra loads of work or some other complicated cuts.
The professional woodworkers may require dual functionality and high efficiency because their work might demand a large number of several cuts.
More precisely, a dual bevel miter saw will provide flexibility to the operator by offering a more excellent movement range to make cuts.
However, a single bevel miter saw can also cut several angles, but it will require the extra effort of flipping the board to make further cuts each time.
Now you might be wondering why one should select a tool with fewer features over a tool with a more significant number of features, right? Let us help you through it.
Some people might feel comfortable flipping over the board to create cuts despite owning a dual bevel miter saw. The main drawback of the dual bevel miter saw is that it is costly.
If you are entirely sure that you will utilize the dual bevel miter functions to the fullest to make it worth spending a significant amount of money, then it is beautiful.
But if you think your work can be quickly done with a single bevel miter saw, there is no need to expand the budget.
Anatomy Of Compound Miter Saw
After you have completely understood and are sure about the functions of the miter saw, now it is essential to have an idea about the anatomy of the compound miter saw.
It is because we believe that you should have complete information regarding the field you are getting into.
It will help you understand the cutting process and have a better idea of maintaining your compound miter saw adequately.
Below is a list of parts that a compound miter saw chiefly includes
-
Fence
The fence is the disguised wall that is present on the compound miter saw.
It is the kind of wall on which the material that has to be cut is pressed for lean and accurate cutting. A straight fence will make sure you achieve the same angle that was set.
It provides stability to the material, especially when you have to cut extensive crown moldings or baseboards.
There is another type of fence that is known as the sliding fence. Such fence extends away from the place where you are cutting.
-
Miter Adjustments
The miter adjustment present in the compound miter saw is responsible for allowing the blade to turn towards various angles and sometimes up to 60 degrees.
A quick adjustment present in your saw will allow you to prevent a lot of frustration while cutting and save you a lot of time by multiple positive stops.
-
Bevel Adjustments
The miter adjustments make a saw miter saw; similarly, a bevel adjustment makes a saw compound miter saw.
It is because both of them hold some importance in the process of cutting. The bevel adjustments are usually present at the backside of the compound miter saw.
It initially allows you to adjust and change the blade’s vertical angle. A large and visible scale makes it convenient for the operator to read the bevel adjustments.
A dual bevel miter saw tilts in both the direction left and right while a single bevel miter saw tilts at either of the one left or right direction at a time.
-
Trigger/Handle
The handle present on the saw usually contains a trigger. This trigger then allows you to control the blade of the saw.
It actuates the saw and allows the operator to pull down the blade into the cutting process material.
Many of the saws contain a handle in the middle allowing control to both the left and right-handed operators.
Similarly, some of the saws are likely to favor the operator with handle placement.
-
Sliding Rails
Sliding rails are only found in the sliding miter saws. As mentioned by the name, their function is quite obvious and straightforward.
Sliding rails let the blade and the handle to outstretch and elongate away from their previously set position.
The sliding rails’ length also plays a vital role as it determines the maximum width of the material that is sure to be cut.
What Kinds Of Cuts Can Miter Saw Do
A miter saw is a versatile and very sophisticated tool with several types and models. It is the kind of tool that out rivals in achieving many different types of cuts such as:
-
Cross Cuts
Crosscuts are created perpendicular to the grain of the material.
-
Miter Cuts
Miter cuts are created angled across the face of the material.
-
Bevel Cuts
Bevel cuts are created angled across the edge of the material.
-
Some Other Cuts
A miter saw can perform some other useful cuts such as rabbets, dadoes and lap joints.
Factors To Consider When Buying A Miter Saw
Buying tools for your personal use or even for the workshop is fascinating. But do you understand what you need?
Are you aware of the requirements of your projects? If not, then thoughtful considerations should be made.
It will help you buy the best suitable tool, save a lot of your time, and ultimately prevent you from getting confused.
Here are some factors that should be considered before buying a miter saw
-
Power
It is vital to acknowledge that sometimes the more powerful means are, the more dangerous.
The power of the motor might be the foremost thing to consider when buying a miter saw.
It is because you would always want a saw that let you feel like you are cutting smooth without any tear outs.
Cutting smoother means you would require a potent motor.
Always know how much power you usually require before buying because buying an overpowered machine than the need can lead to accidents.
Most commonly, it is recommended to use a motor of 3500RPM
-
Blade
The next most crucial factor is the blade quality and blade size. Remember that the larger the blades, the greater the tooth count, which means you can create several smooth cuts.
However, you don’t need to require it, or your tool is compatible with a large-sized blade. The average blade size that is globally used is 10″-12″ blade size.
You might not necessarily need a 12″ blade. Tooth count is also an essential point to consider as it ensures better and smoother cuts.
-
Cutting Ability
The cutting ability should be the most crucial factor to consider after the motor power. Apart from getting the right powered motor and blade, you would want the ability to make precise cuts.
Make sure to check if your saw has the following cutting abilities
-
Reliable lock
Make sure your tool has a reliable lock. It will keep the material in the same position you want it to be. It will also ensure that your material does not move out of its place while cutting.
-
Positive Stops
It would be best to consider the positive stops as they make the cutting work even more comfortable.
Positive stops are usually set at the most common angles. It typically enables the operator to perform and alter the cuts rapidly, specifically for these angles.
-
Bevel
You should also notice the bevel angle of the saw. Determining and observing the bevel before making the purchase is also important because it allows the tool to tilt. It also makes the saw rotate its base, which changes the angle you would be cutting.
-
Safety Features
Besides all the technical features, you should also look for the safety features as your safety is the foremost factor you should care about.
Even though many manufacturers have now introduced built-in safety features to prevent mishaps, you still need to take a brief look before buying.
The first safety feature that you should consider is the saw guard. It will prevent you from getting involved in any sort of accident.
The second safety feature to consider is the base of the saw. It could be served and accommodated by a quality miter saw stand. Another essential feature to consider is the electric brakes.
Electric brakes will let you stop the blade instantly within a few seconds, just if any body part or material comes in contact with the saw blade.
This safety feature ensures you to prevent any sort of hideous accidents.
-
Other Features
After considering all the technical features and requirements, you need to focus on the additional features.
Note if the saw you are about to buy is offering you add other features or not. If the saw is providing you with other features apart from the common ones, make sure to have these:
- Laser guide attachment for precise and accurate cuts along the mentioned cutting line.
- Clear cutting guards so that you can directly see through and determine what sort of cuts you are creating. This feature, along with the laser guide, will make your work easy.
- Dust collection feature is also considered very important now because it collects all the sawdust and airborne particles and keeps the work area clean. It will also help in better visibility of the saw scale.
Things You Should Know
Knowing the type and size of your saw can help you deal with many other factors as well.
There are various other things that you should also know before making the purchase.
You might get annoyed by many researching and collecting information, but hopefully, they will help you in the most obvious ways.
Some things that you should know are
-
Amps
Power is usually measured in AMPs. You should know precisely how much power you would need. Most commonly, a 15AMP power motor is used.
However, 15Amp is far intense than what an average ordinary woodworker would require. The best alternate to this is a 10 amp motor, which is fit to use.
-
Blade Guards
The blade guard will help keep the material or the tear outs away from the blade when the saw is working.
You can also see what your blade is cutting until and unless the saw is lifted.
-
Depth Stops
These are quite similar to the positive stops, but the main difference is that they are at the saw’s maximum height.
This feature will allow you to handle how deeply you want to cut and the blade’s height.
-
Fences
A fence is a kind of wall that keeps the material that has to be cut firm and steady. The cutting material is pressed against the fence to not move out of place while cutting.
-
Table Extensions
Table extensions are generally required for those woodworkers who work with more extensive workpieces. Table extensions might seem a fancy word, but it helps the operator keep the large wood pieces on it.
-
Shaft Locks
Shaft locks are mainly required when changing the blades. They help in locking every other thing in place so that you can easily change the blade.
Conclusion
In this above-written article, we have detailed the best double bevel miter saw. We have mentioned some models that might be useful for you.
The factors mentioned above that are necessary to consider before making the purchase will result in buying the correct item according to your needs.
A dual bevel miter saw might be a very technical tool, but you can make full use out of it by following the right methods and tricks.
FAQs
Q1. What Is The Best Dual Bevel Miter Saw?
Ans. Following is the list of best dual bevel miter saw:
- Best overall: Dewalt 12-inch dual compound sliding miter saw.
- Best value: Metabo 12-inch dual compound miter saw with laser.
- Best for beginners: Hitachi 10-inch single compound miter saw with laser.
- Best for pros: Dewalt flex volt double bevel compound sliding miter saw.
Q2. What Is The Difference Between A 10″ And 12″ Miter Saw?
Ans. The main difference between these two blades is the tooth count. The 12-inch miter saw blade has a higher tooth count for smoother cuts, while a 10 inch has a low tooth count. 10inch moves ten times faster than the 12inch blade because the 12-inch blade is more massive. A 10″ miter saw comes with a 13amp motor, but a 12-inch miter saw comes with a 15amp motor.
Q3. Do I Need A Double Bevel Miter Saw?
Ans. If you are someone who gets a large number of woodworking projects with deadlines and usually deals with larger pieces of wood with work other than picture frames, trims and DIYs, then a double bevel miter saw is the right option you.
Q4. Why Do You Need A Dual Bevel Miter Saw?
Ans. A dual bevel miter saw can cut in both directions, left and right, by tilting its head. It will enable you to create opposing cuts each time without flipping over the wooden workpiece. It saves time and extra effort.
Q5. What Does A Dual Bevel Miter Saw Mean?
Ans. A dual bevel miter saw means that the saw’s blade angles could be adjusted to both directions, whether left or right.
Q6. Is The Sliding Miter Saw Worth It?
Ans. Those carpenters who work with large and more comprehensive wood pieces than the usual size require the sliding miter saw. A sliding miter saw has sliding rails that let the carpenter bring down the blade and cut through the wood’s entire length without stopping. It saw also helps in creating several repeated cuts.
Hence, a sliding miter saw is worth it.
Q7. What Is The Best Sliding Miter Saw For The Money?
Ans. The best sliding miter saw for the money:
- DEWALT DWS779 12″ Sliding Compound Miter Saw.
- Hitachi C10FCG 10″ Compound Miter Saw.
- DEWALT DWS709 12″ Sliding Compound Miter Saw.
- Hitachi C12RSH2 15-Amp 12″ Sliding Compound Miter Saw.
- Festool 561287 10″ Sliding Compound Miter Saw.
- DEWALT DWS780 12″ Sliding Compound Miter Saw