If you have ever used a brand new miter saw you would know that blades attached to the brand new miter-saws are rarely any good. They render incredible performance in the beginning, but the performance starts fading out not within months but days. They are right to get started, but with the time you will feel to upgrade them with a better option available.
Whether your work surrounds metal or wood, without a sharp, precise, and sturdy blade, you cannot make accurate cuts.
Like the way, a razor from a good brand is not enough to give you a smooth shave without a sharp blade. In the same way, a miter saw can be attached with a myriad of features and advanced function, but without a sturdy blade on it, you cannot achieve the desired results.
If you are desired to attach a new blade to a miter saw, it would be hard to decide which blade to go with. The market is saturated with a myriad of options; there are so many choices and option available.
That’s why we have provided you with a detailed guide to help you choose the best miter saw blade. We just did not pick the top miter saw blades randomly; we have tested them and found their pros and flaws to provide you with a detailed, accurate guide.
That’s why we’ve written this article. We want to help you choose the best product as per your need and requirements, so that the desired results could come.
Top 10 Best Miter Saw Blades For 2020:
We hope that the article could help you buy the product you are looking for. We hope that after reading the entire article, you will be able to take the right decision as per your work requirements and budget constraints.
IRWIN 10-Inch 180T
Freud 10 x 24T
Concord Blades WCB1200T120HP
Freud 12 x 80T
Diablo Freud D12100X 100 Teeth Sawblade
Diablo’s 12-inch teeth saw blade is one of the best-rated products on amazon. The most popular blade for 12-inch saw outperforms other blades in every section. The customer’s feedback is impressive; the product has garnered positive reviews until unless.
The diablo Freud D12100X 100 blade is perfect for trim work, have precise trims with this incredible teeth saw blade.
The blade is crafted using high-quality steel material, thus the blade is widely used for cutting illuminated and other metals. You can have it for wood cutting, aluminum cutting, plywood, MDF, and much more.
The blade would not let you get tired due to its seamless performance. For extended hours, when you need to go through lots of work in a single shift, the blade comes to rescue you. With the blade cutting any material would be easy, the shear-face grind design the blade is bolstered with will make you continue any amount of work for extended hours without taking any break.
The blade would not generate any vibration or noise, like the way the average blade does.
The blade is precise and accurate, at least due to the blade; your woods would not go waste. It maintains the accuracy and precision for long-time, a sheer joy to work with such blades.
We emphasize on safe usage of the blade. The blade is very sharp, and it remains sharpness till long-day, effortless to use to cut through anything you throw at it. I cannot find a better option than that to obtain that range of versatile work and performance. Just put the blade to the wood and see how seamlessly it cuts through anything.
The blade is crafted using cutting-edge technology. The carefully designed blade is crafted using a laser-cut stabilizer, which adds to not generate any vibration or sound even after continuous usage of it.
- Perfect for any kind of wood cutting
- Maintains the accuracy for long-time
- Easy to install in the miter-saw
- Perfect for taking slim cuts
- Precision would not let anything wasted
- The sharpness remains for long-time
Top 10 Best Miter Saw Blade Reviews
Diablo by Freud D1060X 10″ x 60 Tooth Fine Finish Saw Blade
If you are looking for the best miter saw blade to get exquisite results while when working with an exceptional finish material, Freud D1060X would not let you down.
The blade is precise, quick, and easy to use. The fast cutting through the different objects will make you save your precious time alongside the blade requires zero to no sanding.
The Freud D1060X blade features a new design, the superior design it bolsters make the users enjoy the stylish nature of the saw blade. The new model is accompanied with lots of comfort and ease.
The blade features 60 Hi ATB teeth pairs with a 0.98-inch thickness of kerf between the blades.
Whether you are going to throw softwood or hardwood, the blade design will make you quickly process them. The cross cuts, beveled cuts, and angled cuts would be achieved without any hiccup.
The blade has Perma shield coating with 5/8-inch arbor that makes it perform superbly with zero trouble.
If you are going to cuts through the wood to craft cabinets, MDF, Plywood and furniture without any error or melting, have the Freud D1060X on-board, you will enjoy every second of woodworking.
The blade is capable of producing smooth error-free cuts. The blade’s geometry is designed in a way that it reduces grabbing.
The blade also comes with laser-cut stabilizer vents, the vents trap noises and vibrations and minimize grabbing and wrap.
You can have the blade for table saws and sliding saws to get desired results on different types of metals such as woods, aluminum, and plastic.
- The laser stabilizer reduces vibrations and noises
- Make prices cuts
- The design of the blade produces noiseless results
- The coating helps it withstand in heats
- Provides flawless coating
- Durable and fast
- The scrap wood processing would be complicated with the blade
Diablo D1050X Combination Saw Blade
If you are the one who goes through lots of ripping and crosscutting and looking for something which could deal with both types of woodworking without getting tired, Freud D1050X Diablo will fill the bill. With the blade, you can do tons of ripping and crosscutting without changing the blades. The blade is good at crosscutting as well as cutting large wood pieces.
The blade features 50 teeth; the number of teeth is capable of providing improved cuts without any error.
Out of 50, the 40 teeth are small, which adds to the crosscutting with smoothness. The rest ten larger teeth help you remove shavings during ripping, to make the process easier and seamless.
You can do both the working with the blade, no need to replace or change the blade to carry out either of the tasks.
The blade is a laser-cut to render the highest level of precision, with a stabilizer to reduce the vibration and noises during cutting through.
The product also comes with Perma Shield coating, which saves the blade from resist damage due to corrosion. You cannot say that the coating helps you to get better crosscuts or to rip, that’s only to extend the lifespan of the blade, saving from corrosion and heat.
So, now for getting both the types of jobs done, cross-cutting and ripping, you do not need to shop for a dedicated blade. The one Freud D1050X Diablo blade can do the job quite efficiently.
For most of the carpenter, the blade is best valued, as it comes in hands comparatively less price range, and gets the job done without switching through different blades.
- Teeth count 50 is ideal for cross-cutting
- Perma Shield coating saves it from corrosion and heat
- Laser-cut stabilizer adds to reducing the vibration and noises
- Ideal for ripping and cross-cutting
- Gets your job ease down to a marginal level, without switching through the blades, you get ripping and cross-cutting
- It is not a specialized blade
IRWIN Tools Classic Series Steel Table / Miter Circular Saw Blade, 10-Inch 180T (11870)
I have seen carpenters stocking different sizes and types of blades to carry out various jobs. This is an expensive way, mainly if you stick to a premium brand. It would be breaking the bank account to house a dedicated blade to do a separate job.
The IWRIN tools classic series is exceptionally affordable and comes in hands in the budget range. The 10-inch blade with 5/8 inches arbor brings magic to woodcutting.
The blade features 180 teeth; the teeth are made with heavy metal, high-carbon steel to produce mesmerizing and smooth results. The blade is enough to cut through mild steel without causing sparks, which is a rare thing to carry out using a miter, saw though. The blade withstands wear and tear, and as per my experience, it lasts a very long time.
With the thin kerf design, the cuts it makes are smooth and accurate. With the product, you keep the wasted material minimal, with a fully hardened plate it runs for a more extended period.
If you want to cut through lots of metal sheets, have the IRWIN blades onboard, it would do the job efficiently and quickly. The price, on the other hand, is not that much comes in hands in the budget range.
- It is designed to provide the highest accurate cuts
- The product is made of high steel carbon construction to render maximum durability
- The fully hardened plate produces longer lifespan
- Comes in hands at a reasonable price tag
- Blades get dull easily
Freud 10″ x 24T Thin Kerf Rip Blade (LU87R010)
If you have a low horsepower saw and looking for the best suit blade for it go for Freud 10″ x 24T. That blade would give a new life to your underpowered saw; it does not require much horsepower to produce results. The Perma Shield coated blade pulls less power and renders 33 percent more results.
The 10-inch Freud Blade is ideal for ripping hard and softwoods. The blade delivers optimum results in crosscutting wood or working with plywood. The saw is perfect for cutting through the material of dimension 3-4 inches thick. The blade can handle thinner and thicker material equally, and ideally helpful for cutting through clipboard or laminates. The massive tooth though makes your wood piece lose some surface finish when it runs through, ideal for outside range.
The Freud blade features anti-vibration features to minimize the vibration and noises while cutting through the different metals. The blade is laser cut from high-strength steel, so you can trust it that it would stay stable for a more extended period.
The material to craft the blade is of high-density carbide that offers improved designing, hardness, and resistance.
The Perma shield coating the product is coated with enhances the lifespan with reducing the friction. The coating protects your tool from external heats and other hard effects, which reduces the life of it.
Being a lubricating feature, the Perma Shield feature allows the blade to spin freely with reducing stress on motor and carriage.
Besides, the coating also prevents debris collection on the blade; the pith builds up to causing extra drag on the motor, with the Shield it would not pile up now.
- Ideal for low horsepower saws
- Anti-vibration and anti-noise design
- Crafted using high-density carbide to produce maximum cutting performance
- Perma Shield coating protection reduces friction, dust built up and heat buildup
- Gets dull easily
DEWALT DW3106P5 60-Tooth Crosscutting and 32-Tooth General Purpose 10-Inch Saw Blade Combo Pack
DEWALT comes with an alluring offer to most people. The DEWALT DW3106P5 comes in a pack of two blades for the price of one. The great deal comes in hands at the lowest price possible, and blades live to the expectations level.
As described the package comes with 2-blades, the one with 32 teeth blade for ripping and cutting through general works: the other one, 60 teeth blade for high-quality precision crosscutting of the woods.
The blades are advertised with the computer-balanced plate; the plates are used to decrease the vibration and noise and increase the accuracy to render possibly better finish.
Both blades fit with a wedge that increases pressure on the steel behind each blade, to minimize the chances of breakage.
The 10-inch saw blade can cut through the plywood, softwood, and chipboard quite easily.
I needed to mention one crucial thing specifically about the package. It has noticed that many of the blades in the package come inconsistently sharpened. It means you will have to grind them or need a touch up before using it for the first time.
If you know how to sharpen the blades, good to go with them, if you are the one using them the very first time and have no idea about sharpening, they are not the best for you.
- Comes in the package of two blades
- Budget price range
- Can cut through any metal precisely using 60 Teeth blade
- Inconsistent sharpness
- Not ideal for fine finish
Makita A-93681 10-Inch 80 Tooth Micro Polished Miter saw Blade
Makita A-93681 is one of the most excellent 10-inch blades you can grab. The product is one of the most sought-after blades, due to its overall positive feedback. People are more than happy with it and satisfied with the performance. This is the best-selling 10-inch miter saw blade; the satisfied customers are the most evident example of its success.
The blade comes in hands at a local price, with a range of action capacity onboard.
The saw blade is suitable for cutting through various substances without any hiccup.
If you own a small miter-saw and looking forward to having some sharp blades to put on it, have that blade. The blade is considered the first choice among the miter saw users; its performance has wreaked the havoc in the industry.
The blade can be used for cutting through plywood, softwood, and hardwood. Though the blade is made of high-quality steel, it shows some imperfection in its design.
The blade is bolstered with ultra-thin kerf carbide-tipped design, thus render fragile performance. The blade cuts through the metals at great ease, and would not waste any material.
- Produce impeccable performance
- Cutting through would be a breeze
- Supports fine cuts through any metal or wood
- Equally good for soft, sturdy woods
- Cheap price range
- Did not use high-quality steel to craft it
Concord Blades WCB1200T120HP 12-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade
If you are looking for a general-purpose blade to cut through hard and softwoods, Concord 12-inch 120-tooth blade is an excellent grab. The blade produces by the Concord is a fine fit for professionals who use to go through the ripping, shaving off woods and cross-cutting more than often. The blade is really fast with its rotation, the thin kerf it is bolstered with offers an excellent finish with little waste to clean up.
Professional quality constructed blade can rip through 3 1/2 inches thick hardwood and 1-inches thick for softwoods.
The blade is made to be fit on Miter saws, circular saws, table saws, and hand saw and produces up to 4500 rpm rotation without any hiccup. The spinning speed is incredibly fast, easy to cut through wood, and gets the job done in no time.
The most intriguing feature of the blade is that it is made of hard titanium carbide. This is the most expensive material available to craft a miter saw blade, ultra-sharp.
The blade without a single shadow of doubt can go through various non-ferrous metals such as aluminum, brass, bronze, copper, and plastic. With 120-teeth counts, the blade can achieve maximum depth quickly, without leaving much of waste to brush off.
From my personal experience, I have seen that the blade is quite useful and can cut through any non-ferrous metal or wood you throw at it.
- Titanium Carbide teeth can make you cut through any metal
- The design helps through achieving distinct results
- The perfect blade to cut any metal likes of aluminum, brass, bronze, and copper, etc.
- Poor performance for cutting through hard material
Freud 12″ x 80T Thin Kerf Fine Finish Crosscut Blade (LU88R012)
Freud is the biggest brand in the world of wood-cutting piece manufacturing. The brand has a line of incredibly performing blades including the 12-inch Freud with 80-Teeth.
The thin kerf finish blade delivers unparalleled performance for cross-cutting, softwoods, hardwoods, and molding. The miter saw blade is something amazing even when you put it on an underpowered saw.
The material used to craft the metal is incredibly powerful. With Perma Shield coating, the blade becomes seamless while cutting anything you throw at it including bronze, aluminum, plastic and much more. The coating reduces the friction and also prevents your blade from building heat up. The traditional cheap blades when got to cross-through hardwood or hard metals starts getting heat up and burns
Freud 12-inch saw blade renders fine finish when you have it for decorative molding and other works where precision matters the most. The thin cross-cut saw blades feature a configuration of 80 top bevel teeth with hook angles, perfect for making you have the most elegant cut to craft any masterpiece.
The blade is ideal for cutting through 1/2 to softwood and 2-3/4 hardwood. The blade gives it best when used for crosscutting, plywood, and chipboard and ripping wood.
The blade can also handle laminate and can handle any material thinner or thicker without any hiccup.
The Freud blade is designed with balance and precision for truer cuts. The product features anti-vibration slots that help it to minimize the vibration and noise while going through different woodworks.
- Thin Kerf reduces waste
- Positive hood angle renders smoother cuts
- Ideal for crosscutting hard or softwoods
- Heavy-duty metals can be feed easily.
- Anti-vibration slots help it reduces vibration and noises
- Perma Shield coating reduces friction and heat build-up
- Some users complain about the blade ripping through very aggressively
Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor
Diablo 12-Inch miter saw blade with 80-tooth is the next generation blade to provide precise and clean cuts in a variety of wood and material.
The blade features stabilizer vents from top to bottom to absorb noise and vibration and prevent sideways movement. The stabilizer also adds to the clean and elegant slicing through the wood with zero error.
The latest diablo miter saw blade is a fine addition to your workshop; it enhances the versatility and fits in doing for various jobs.
The blade is crafted with high-quality TiCo blend with special carbide. The blade renders precise cuts and offers five times extended cutting.
The laser-cut heat expansion integration allows the blade to get an expansion during the actual using of it, providing straight and clean cuts.
The blade is considered a true grab for building bookcases, cabinets, shelves, doors, and much more.
If you are the one who goes through lots of veneer Plywood and delicate hardwood, look no further and opt-with Diablo D1280X 12-inch saw blade. This is your blade to slice through oak, pine, veneer plywood, and other delicate moldings.
Diablo’s next-generation product features cutting-edge design. The design lets you enjoy the comfort and smooth during wood processing. The thin 0.118 inches kerf between the blade’s 80 alternate top bevel teeth provides firm control over blade position while cutting it through.
The feature adds to the accuracy and cut through different objects with great efficiency, so you enjoy the job doing and complete more task than a normal blade.
- Makes clean cuts through wood and delicate molding
- Produces smooth and quiet results
- Features shock resistant carbide to absorb noise
- Hi-density carbine to craft the product
- Extended life span
- The sharpness gets dull quickly
Some Major Considerations For Buying A Miter Saw Blade:
Purchasing the best miter saw blade is a little tricky. If you could have an expert on-board which could tell you the best as per your work needs, it would be great. In case you have no one to take advice from, nor you are experienced enough to decide for yourself, the guide would help you. If you have never purchased a miter saw blade, read the guide from the full and in the end, you would have enough knowledge to give touch time to a new salesperson.
Choosing the right blade can make or break your cutting experience. That is why it is recommended to take some time and select the best for the best results.
These are some things you need to have in mind before buying a miter saw blade.
Type Of Blade:
Before purchasing a miter saw blade, you need to know that the kind of blade you want to buy. The type of blades depends upon the kind of work you need to carry out. There are different types of miter saw blades; we are mentioning the types and their usages. Have a look and decide the kind of work you usually undertake.
Reciprocating Saw Blades:
If you deal with metals, woods, and drywall most of the time, the reciprocating type saw blade would fill the bill with great ease. We have added some of the kinds blades have a peek and see if that fall right on your needs.
Circular Saw Blades:
Being a carpenter or DIY enthusiasts, most of the time, we have to deal with titling work. The type of blades is ideal for titling work for cutting wood, metals, masonry, and much more.
Course Cut Blades.
Course cut blades are considered ideal for cutting through hard-wood, softwood and cutting through boards and much more. The board renders performance for big-sized lumbar and makes precise cuts through bigger woods.
Fine Cut Blades:
The kind of blades is ideal for crafting doors, interiors, and furniture where fine finishing is imperative.
The next section comes, types of material used for crafting the blades. There are three most common types
- Carbide Tipped
- High-speed steel
The most expensive material used for crafting miter saw blades. If you need to have delicate finishing jobs to manufacture furniture or other stuff, have that option. The material produces impressive results and provides accurate cuts; last longer than the other two.
Steel is the most affordable option to go with. If you are the one who deals with softwoods, they are useless and dull quite quickly when used for hardwoods.
The high-speed steel blades are more robust than normal steels blades. They are used for a wide variety of woodworking and renders performance at higher speeds. They would not go dull for hard-floors as normal steel.
Size Of The Blade:
Before giving a final shot to a miter saw blade, must check if it compatible to your miter saw or not.
You see different size of miter saw blades available in the market. The most common size of the blades is 10-inches and 12-inches.
You may witness some miter saw blades adjustable for all types of miter saws. Do not buy them, they might be compatible with your miter saw, but the performance level will significantly drop.
Cutting through the hardwoods require a 12-inch miter saw. Lots of stuff will not go smooth if you buy a wrong size of the miter saw blades. So, always check your miter-saw size and give a final shot to the blade.
The Number Of Teeth:
This is another essential consideration to look into when buying a miter saw blade.
If you are the one who deals with bigger sizes of woods and often needed more substantial cuts, look for a miter saw with fewer teeth.
The fewer teeth miter saw is used to get larger cuts. The fewer teeth miter saw produces less dust, and you get less amount of waste material.
In the case of more teeth, miter saw blades; you can use them for excellent and smooth finishing. With more teeth blade, the wood piece would not go waste. You can have a miter saw with 30-180 teeth.
For a normal miter saw, which could go on both sides, you can have 80-100 teeth miter saw.
The thickness of the cuts determines by the type of Kerf a miter saw blade owns. The thinner kerf blade design is considered best to carry out jobs where fine finishing and precise cuts are required.
The kerf determines the space between the workpiece after cutting it into two. With the broader kerf design, the area between the workpieces would be wider than the thinner kerf design blade. So, it is upon you now, which type of blade saw with kerf you prefer.
Whenever we purchase a product, we decide on a budget beforehand. Like, if you are going to shop for some clothes, you visit a store as per your budget constraints. You would not visit a store whose products are beyond your purchase power. In the same way, you need to fix a budget to get a miter saw blade. After taking out that money, hunt for the miter saw blades, you will have a good option in that budget range.
While purchasing a miter saw blade always look for a product whose design is suitable for your miter saw. If the design of the blade is not appropriate, the blade would never render the optimum performance; the blade would produce noise and vibration.
Even the blade’s design is mostly dependent on the stability of it.
Can You Use A Miter Saw Blade On A Table Saw?
It depends upon the tooth count, hook angles, and kerf thickness. Check your old blades mentioned features on the packaging which will decide whether the blade will safely be made the switch between the jobs or not.
Check the tooth range of the miter saw blade, if the range of the tooth is between 40 and 60 that would be switched.
Miter-saw blades usually feature more teeth compare to table saw blades; more than 60 teeth will go very slow on your workpiece and may burn the wood quickly.
You can have blades designed for miter-saw on the table but have a different tooth configuration to make the process safer.
Are More Teeth On A Saw Blade Better?
You need to learn once, and for all, the more tooth blade means smoother cuts. If you are going to carry out a job where smooth finishing is required, like in furniture, high tooth number will help you get this done quickly. The fewer teeth mean faster cuts.
There are other factors as well, which plays a part when you cut through the wood pieces. Such as cut quality, feed speed, and how fast you feed the material into the saw, and how quickly is the saw blade.
The blades with 80-100 teeth are typically designed for excellent application where the quality of cut matters. People who need to cut picture frames, windows blinds and other similar items use a saw blade with a lot of teeth as a higher number of teeth blades makes a total fine and smooth cut without any error.
Can You Use A Miter Saw Blade To Cut Metal?
Miter saw it is famous for woodworking projects. This is mostly used for woodworking, such as for building chair or table frames, floors, etc. It is also used in different industries for cutting through soft materials or plastic. The use of the miter-saw extends through aluminum; cutting through aluminum and wood would be great.
Miter-saw is not good for cutting through steel; it would not give you accurate and clean 45-degree cut.
So, have the miter-saw for different metals such as plastic, aluminum, and wood, not for steel. In trying to cut through the steel, you may burn your expensive blade.
How Many Teeth Should A Miter Saw Blade Have?
The number of teeth a blade has a significant impact on the performance. Does it determine how effecting the cut would be?
For smoother finishing, you should go for a blade with many teeth. For rough cutting, bush cutting the finish does not matter, and you need something that could finish the job as quick as possible.
If you need to cut through plastic using a miter saw, a suitable blade for it should have an ample number of teeth. Too many or too fewer teeth would impact. Otherwise, too many would melt the object, and less would not cut it through.
Miter-saws are used mainly for finish work, not for steel or other hard metals. They should at least feature 80 teeth on their saw.
Woodworking depends upon cutting the wood as per the needs.
A saw is the first line of defense in woodworking, and you need to get your horses ready all the time. A saw without a high-quality, sturdy and sharp blade is just a showpiece.
Whatever features a saw integrates within, if the blade is not bright and sturdy enough all would go in vain. So, it is integral to have the best saw blade, which could result in exclusive productivity.
The mentioned miter saw blades are the best. If you use them with care and proper maintenance, they can serve you for many years.
Hope the guide will help you choose the best Miter saw blades as per your requirements. If you like this guide, please help us spread this all over the web.