Miter saw is one of the most versatile and durable tools available in the market. They are commonly present in almost every woodworking shop.
However, buying expensive miter saws is not the only way out. It is the reason that we are going to discuss the ten best miter saws for the money.
These tools are used for completing a wide range of tasks. You can use miter saws for performing cross cuts, bevel cuts, miter cuts and various other cuttings.
It does not matter if you are cutting molding or chopping 2×4 inches. There is no task that a miter saw cannot manage.
There are many options available in the market when it comes to buying a miter saw. It certainly causes some confusion amongst the beginners.
However, you need to make sure that you are not over-spending money when buying a miter saw.
The best miter saw for the money entirely depends on your needs and specific requirements. It would be best if you were sure of your usual woodworking tasks.
Additional features, according to your requirements, means more cost added. This article will certainly assist you in purchasing the miter saw to your needs and budget.
Once you have the information about the ten best miter saws for the money, it would be effortless for you to select one out of them.
But this will take some time as you then have to read the article till the end to understand the complete information about the miter saws, their usage, considerations while purchasing and many more.
Top 10 Best Miter Saw For The Money Review & Buying Guide
1. Hitachi C10FCE2
The Hitachi C10FCE2 is a powerful miter saw that uses a 15amp strong motor and 5000rpm for delivering ultimate refined cuts.
This 10-inch single bevel compound miter saw is operated electrically for the toughest cutting jobs. This power tool is comparatively lightweight and easy to handle.
The wide range of cutting capacity makes it unique and outstanding. It has a 0-52 degree miter angle range to both left and right.
It also has a 0-45 degree bevel angle range to the left along with adjustable positive bevel stops. These positive stops are at the most commonly used angles for précised cutting.
The 10 inches saw blade is manufactured up of tungsten with carbide tooth resulting in straight cuts.
The horizontal handle present on the miter saw is soft and easy to grip and reduces the vibrations while cutting.
The large flip fence is extended and can rise to 4 inches for vertically cutting the crown moldings.
Besides that, this durable miter saw is well-equipped with an extension table that provides stability and support to large and wider wooden boards when cutting.
2. DeWalt Dws780
The DeWalt DWS780 is a 12-inch double bevel sliding compound miter, particularly for performing accurate crosscuts through tough wood.
This miter saw is also compatible with cutting through thin aluminum sheets and plastic. It also includes an ultra LED light for maximum accuracy.
This miter saw runs on an intense 15 amp motor powered by 3800rpm. It is a light and compact saw that can be carried conveniently.
This power tool features a challenging 12 inch 60 tooth blade for delivering cleaner cuts.
This miter saw also has a complete cutting capacity. The adjustable stainless steel miter plate contains ten positive stops at the most common angles for maximum accurate cuts.
The double bevel present on this saw can tilt towards left and right to easily cut complex cuts.
It can also cut tapered boxes and crown moldings with ease—the 45-degree override helps adjust the bevel angles slightly.
The efficient dust collecting system captures about 70% of the sawdust generated, keeping the work area tidy.
However, this sliding miter saw might take extra pressure to slide the blade through.
3. DeWalt Dw715
The DeWalt DW715 is a 12-inch single bevel compound miter saw with a 15amp motor and high-quality top performance. It is designed to deliver accurate cuts rapidly.
The lightweight and portability of the saw make it easier to carry. The sharp 12-inch blade has carbide teeth for performing severe cuts.
It also includes a blade guard for easy blade changing and ensuring your safety while cutting. The tool is convenient to work without stressing your hands.
It also has an impressive cutting capacity with four hardened steel bevel stops at 0, 33, 45 and 48 degrees for précised cuts.
The crosscut capacity is up to 2×8-Inch dimensional. The miter saw bevels quickly to the left up to 48 degrees and the right up to 3 degrees.
Moreover, the adjustable stainless steel miter detent plate has around 11 positive stops at the most common angles.
This innovative miter saw includes a tall sliding fence that provides stability and supports crown molding up to 5-1/4 inch nested and base molding up to 6-1/2 inch vertically.
The cam lock miter handle and the miter detent override, twisting the handle lock and slipping. However, this miter saw does not come with a laser guide.
4. Hitachi C10FCH2
The Hitachi C10FCH2 is a 10-inch single bevel compound miter saw with a severe 15amp motor and a maximum of 5000rpm for tough crosscuts.
The angles on this saw can be adjusted easily for maximum use. The compound cutting mechanism helps perform various types of cuts.
The laser guide present with this model makes working even easier with accurate cutting abilities.
The miter cut angles capacity is 0-52 degrees both left and right for covering a flexible range of cuts. The bevel cut capacity ranges from 0-45 degrees to the left with adjustable bevel stops.
The extended flip fence is raised to 4 inches to increase the miter’s cutting accuracy saw, providing stability.
The horizontal handle attached to the model ensures you get a soft and flexible grip that reduces the hand’s vibration and pressure.
Overall, this miter saw is high quality and provides durable and stable cuts.
5. Bosch Power Tools Gcm12SD
The Bosch GCM12SD 12-inch corded dual bevel sliding glide miter saw features of the axial glide system.
This glide system enables perfect alignments of cuts and broader crosscuts. You can save up to 12 inches of your workpiece through this glide system.
It also helps you attain smoother and refined cuts. This 12-inch miter saw works with a robust 15amp motor to support intricate cuts.
The compact design of this saw consumes less space in your work area.
It has an expanded cutting capacity of 14-inch horizontal total, 6 1/2 inch vertical capacity, and 6 1/2 inch crown capacity against the fence.
The bevel cut capacity is 45 degrees, both left and right, for précised accuracy.
This miter saw includes easy adjustments with visible bevel and miter scales that are stainless steel. The scale is registered already with detents.
The upfront bevel control present in the miter saw has an all-metal bevel lock lever and range selector that is useful for setting the bevel quickly without leaning behind the saw.
The integrated, efficient dust collection port captures all the sawdust. The fence can be locked at 90 degrees to the table with the square lock’s help with quick release.
It also does not require any further adjustments. The miter saw uses a one-touch lock/unlock to slide the fence for added stability.
However, the miter saw is quite heavy, which makes it difficult to move.
6. Makita LS1018
The Makita LS1018 10-inch dual sliding compound miter saw has a 13amp direct-drive motor delivering 4300 rpm.
This miter saw requires less maintenance than any other miter saw. This miter saw features a linear ball bearing system that is designed specially to provide excellent accurate cuts.
It also has a 5/8″ arbor. The rear handle bevel lock provides quick access when it comes to adjusting the angles.
With the rear handle bevel lock’s help, you can adjust 0 degrees to 45 degrees towards left and right, having several positive stops at 0 degrees, 45 degrees in the left and right direction.
The miter cut capacity ranges from 0° – 47° left and 0° – 60° right along with having positive stops at 0, 15, 22.5, 31.6 and 45 degrees.
It can also cut up to 12 inches at 90 degrees and 8-1/2 inches at 45 degrees. The miter saw also includes a soft start feature for the effortless and smooth start-up.
This compact power tool weighs less and is very portable, making it easier to carry from place to place. The D handle design of the miter saw adds comfort and better fit.
This innovative feature-packed miter saw also includes electric brakes for faster-repeated cuts.
Also, electric brakes are an essential safety feature; it turns off the high spinning blade within seconds just when something comes in contact with the blade.
7. Ryobi 18
For the money, this Ryobi 18 is the best cordless miter saw. A cordless miter saw is free from any sort of extension wires and uses batteries to operate.
There is no electrical power supply needed to run this power tool. A cordless miter saw is ideal for working in distant remote areas because they are lightweight and can be carried with ease.
This Ryobi 18-volt miter saw is a 7-1/4 inch compound miter saw that is battery operated.
This miter saw has a durable and reliable engine that provides top-level functions and high performance.
The integrated laser alignment system makes the process of cutting précised and to the point. It ensures that the tool is up to date and ready even before any cutting task takes place.
The easy clamping system is crucial to have in your miter saw, as it ensures that the material is held securely in one position while you cut.
This miter saw has a sharp cutting blade with 24 carbides tipped teeth. It helps in attaining fast, accurate cuts.
The spindle lock provides ease while you change or replace the blade. Overall, so far, we have observed that this cordless miter saw is the best for money.
It is because it provides more features for the price tag. Besides that, being a cordless miter saw it as one of the most versatile power tools.
8. Tacklife Sliding Compound Miter Saw
The Tack-life 12 inch dual bevel sliding compound miter saw has an effective motor of 15amp with a no-load speed of 3800 RPM.
It provides ultimate faster, robust, smoother cutting. The miter saw has a sliding cutting design that makes sure you receive adequate cutting width.
The Tack-life miter saw has an integrated laser light that is operated with a single switch. The laser light illuminates the cutline king. It is easier to cut and saw long wooden boards.
The dual bevel cutting design is made to ensure you adjust the saw head up to 45 degrees to the right and the left for meeting different cutting requirements.
The double linear sliding rail design is also responsible for steady and smooth cutting works.
This miter saw also contains a sound quality dust collecting system along with a vacuum cleaner that captures the sawdust and residue to keep the area neat and tidy.
Moreover, the complete extension table provides stability and support to the wide workpieces. The high functioning pair clamping system keeps the material in place while cutting.
This effective miter saw comes with a sharp 40 T blade that is ideal for cutting wood, plastic and other material quickly. The process of changing blades in this tool is also rapid.
Additionally, the miter saw includes one carbon set brush, dust bag, wrenches, two extension rods, 1 set clamping system and a user manual.
9. Makita LS1040
The Makita LS1040 10 inch compound miter saw is the perfect combination between ease, high performance and power with its severe 15amp direct-drive motor powered by 4600Rpm.
This miter saw is versatile and has excellent miter cutting capacities. You can easily tackle cabinetry jobs, deck building, framing, and woodworking with this miter saw.
The miter cut capacity of this saw is 0-45 degrees left and 0-52 right for increased flexibility.
The bevel cut capacity is up to 45 degrees to the left. It also has several positive miters stop at 15, 22.5, 30, and 45 degrees right or left.
The high performance of this miter saw ensures constant power and consistent cuts. The aluminum base is responsible for providing stability and accurate cuts.
This miter saw is lightweight and compact to be carried at different places, along with that, it comes with various aids and accessories.
The Makita LS1040 features an electronic speed control that maintains consistent cuts and constant speed.
The soft-start technology makes sure that you receive smooth start-ups. The dual-compound pivoting arm of this miter saw assists in cutting across the extensive length of the material.
10. Genesis Gms1015LC
The Genesis GMS1015LC 10 inch compound miter saw features a 15amp motor considered one of the best miter saws for the money 2021.
This tool is inexpensive, along with being versatile and durable. It also features an arbor lock for the rapid changing of blades.
It has impressive cutting capacities with a laser light installed. This laser light illuminates the cutline for précised and to the point of accurate cutting.
It also provides proper and quick alignments. It can perform bevel cuts up to 45 degrees left for cutting crown moldings, frames, shadow boxes and many more.
It has a 45 degrees left and right miter cut capacity, including nine positive stops at the most common angles. Performing miter cuts is not a big deal for this miter saw.
The unique electric brakes included in this product provide several repeated cuts in no time.
These are also known as the significant safety feature as they immediately halt the high spinning blade if something comes in contact with the blade.
It prevents you from severe injuries and accidents. The powerful tool with a robust design uses a 60 T carbide tipped blade for sharp cuts.
Additionally, the saw includes a blade wrench, hold down clamp, two extension wings, dust harmful and two AAA batteries for laser light.
However, there is still some room for improvement for the clamping design.
What Is A Miter Saw
If you have ever been to a woodworking shop or if you are a carpenter, you must have an idea about the miter saw. These miter saws are a specialized and upgraded form of circular saws.
These saws are manufactured technically for cutting wood, including various materials such as metal sheets and pipes, sizing up planks and poles.
The blade featured in this power tool is severe and has tough teeth. Their stiff tipped blade allows you to cut through most rigid metal sheets conveniently.
The miter saw is master at performing miter cuts with its sizeable rotating blade mounted on top and attached with a miter gauge for accurate angular movement.
This versatile power tool is not limited to creating basic miter cuts or cross cuts, but it is one of the most valuable tools when you intend to cut door frames, photo frames, moldings, fencing, or even DIYs projects.
The miter saw is no less than any other power tool. It is supposed to be the most useful and beneficial for the addition of great tools in your arsenal of woodworking tools.
What A Miter Saw Can Do
The most apparent function a miter saw can do is to perform miter cuts. Most people might not know what a miter cut is until they have complete knowledge regarding carpentry.
Hence, for the sole purpose of explaining a miter cut, we would discuss a few basic points. These points are essential for gathering information about carpentry.
Wood, just like any other living organism in the world, is made up of cells. It refers to a grain, which is the orientation of wood cell fibers using some technical standpoint, in carpentry.
Several types of woods have straight grain; meanwhile, some other wood types include diagonal or spiral grain.
These are two common types that influence the cutting. Spiral grain is the one that aligns the wood fibers around the longitudinal axis of the tree.
When you cut the cross-sectional of a trunk, you would find a spiraling pattern. On the other hand, the straight grain is parallel to the axis of the tree.
This type of wood is very easily found and convenient to work with. In reality, there are a lot of other grain types.
Many of them are very complex to handle and cut and vary from one type of wood to the other.
However, making the process easy and limiting ourselves to three types of straight, diagonal, and spiral grains.
It visibly shows that a miter saw can easily tackle three types of grains that result in winding up a significant amount of work.
You would find many tables, chairs, desks and other furniture having wood of straight grain in the market. All of these are attainable with the help of the miter saw.
Types Of Miter Saw Cuts
As we are fully aware of a miter saw’s high functionalities and versatilities, we should also more precisely know about the types of cuts a miter saw can perform.
A miter saw is responsible for doing almost every sort of work. The four main types of cuts performed by a miter saw are:
-
Cross Cuts
A crosscut is a type of miter cut formed when a miter cut is executed at an angle of 90° on wood, such as a board, pole and plank, etc.
Such cuts are known as crosscuts. More conveniently, it is known as cutting at right angles to the grain all across the wooden piece or along the wooden piece’s width.
Usually, a crosscut is performed when you intend to cut something down to the correct length or précised measurements.
-
 Bevel Cuts
A bevel cut is somehow not attainable with a basic standard miter saw. It would be best if you got a miter saw with more versatility.
The saw blade is rotated along its horizontal axis to perform a bevel cut. It would require you to have such a miter saw that tilts.
The bevel angle is basically denoted as the tilting of the saw blade from the vertical on the saw table. A bevel cut is referred to when you are cutting along the entire thickness of the wood piece.
Bevel cuts are useful when it comes to creating bevel joints, crown moldings, as well as photo frames and wooden shelves, etc.
-
Miter Cuts
A miter cut is something that a basic standard miter saw can easily perform. This saw is created for this job; therefore, named a miter saw.
A miter cut is basically known as an angled cut. The cutting of this angle is also very convenient.
Cutting perpendicular to the grain of the wooden piece across the entire length of the board results in a positive angle miter cut.
If you repeat the same procedure to the left, you will have a negative miter angle.
Miter cuts are used when you are creating basic photo or portrait frames, door frames as well as window panels.
-
Compound Cuts
The combination of both a miter cut and a bevel cut is known as the compound cut.
This means a compound cut is achieved when you are cutting at angles to both width and thickness at the same time.
A compound cut is not easily performed using a basic standard miter saw. For this, you need to upgrade your miter saw.
Professional carpenters can easily perform this job, but for beginners, it might take some time, experience, and patience.
A compound cut is needed when you are cutting crown moldings, cabinet attachments and other door frames.
How A Miter Saw Works
You might think of a miter saw as an extremely complex and difficult to handle tool. However, the reality is the opposite.
The tough terms and technical information may make it appear complex, but it is one of the easiest power tools. All you need to do is gain some experience, practice and patience.
The miter saw contains a few basic features and parts that are commonly found in almost every kind of miter saw, irrespective of the price.
This power tool revolves around these basic key features and performs their designated job.
These features are simply a motor, blade and frame. Let’s discuss these features below:
Motor
The motor of any power tool is basically its heart. A motor featured in a miter saw is responsible for providing enough power to the circular blade.
A good quality high powered motor results in better and précised cuts.
This is because every time you press the trigger on the trigger handle, it deliberately closes an electronic circuit to let the current run through the motor.
This causes the blade to spin. The high spinning of the blade slices the wood into several pieces. In most of the miter saws, the motor is placed next to the saw head.
This lets the miter saw utilize the direct drive system. Make sure to check the motor before you buy as it influences the quality of your cuts.
Blade
After the motor, the blade is the second most important feature present in a miter saw. You cannot achieve excellent cuts without a high-quality blade.
A miter saw commonly uses circular saw blades. These blades come in several sizes and various tooth types and densities.
For each specific job, you would need a different miter saw blade, which directly depends on the nature of your work.
The types of blades also depend on the thickness of the cutting material. Most commonly, a miter saw has a blade diameter ranging between 8″ and 14″.
However, the two most used blade sizes are 10″ and 12″. These two specific types of blades can tackle all types of regular home improvement, DIY work, and even low-intensity construction work.
These strong saw blades are created to conveniently cut through the metal sheets, and pipes use. Pretty much every sort of work is done with 10/12 inch carbide-tipped blades.
Blade Guard
A blade guard is a very crucial built-in safety feature that must be included in every miter saw.
A blade guard might seem a simple and useless feature, but a dysfunctional blade guard can affect your cuts or even the procedure of cutting drastically.
Before getting yourself, a miter saw, it is good to check the working of the blade guard before switching on the saw.
Nowadays, the most recent miter saw models contain a self-retracting blade guard. This kind of blade guard automatically moves out of the way as you lower your saw into the wood.
A blade guard also makes it easy for you to change the blade without harming yourself.
Miter Scale
It is very complex to have miter cuts without a proper visible and clear miter scale.
You cannot attain précised cuts because you would not know which angle you are cutting at unless you set the saw to that angle by properly measuring it on the miter scale.
A miter scale works as a protractor, which allows you to set the correct position angle for making the miter cut.
The scale plate situated at the top of the miter saw contains marked measurements for several angles in degrees.
If the miter-scale on your miter saw typically contains angles on both sides of the perpendicular line, then the table can rotate both ways.
This means you can easily execute angles at various degrees.
Bevel Scale
Just like a miter scale, there is a bevel scale present on your miter saw. A miter scale helps in cutting miter cuts, while a bevel scale assists in cutting bevel cuts.
The bevel scale is usually placed next to the pivot point of your saw head. The plane of the bevel scale is found perpendicular to the table.
Every saw has some positive stops at several most commonly used angles. If your saw has only positive stops of angles on the bevel scale, most likely, the chances are you have a single-bevel compound miter saw.
It is crucial to know and understand that the bevel scale and the bevel adjustment handle are found in compound miter saws only.
Miter Fence
Most modern and high-quality miter saws contain a durable fence that provides stable support to up to two different height settings.
The miter fence is made of polished aluminum. It is a kind of support that deciphers a wall, and it usually lies on the saw table.
You can easily achieve miter cuts with the help of a miter fence because it moves the wooden piece back and forth along its entire length but maintains a constant accurate angle.
Such high-quality miter fences with adjustable heights provide stability and steady support to the thinner or thicker working materials of various heights against on the cutting table.
Similarly, those fences that are tall can easily perform crosscuts or bevel cuts along the entire width of the working material.
The Table And Extension
The table on a miter saw usually consists of extensions. These extensions are solely added to your miter saw to provide stability and enough surface area for the large materials to be placed on it.
Most of the time, when there are large wooden pieces to cut, they are placed on the table extensions while cutting. This helps you in carrying the wood pieces easily.
These table extensions on the side of the saw can be retracted whenever the workpiece does not demand additional support—the table extension made from cast iron or stainless steel with a completely flat top surface.
The Trigger Handle
A handle is present in the miter saw that is connected with the saw and the motor head unit. A trigger is situated on the inside of this handle.
Once you press the trigger, the saw blade will automatically activate and will begin to spin.
Make sure you check the blade guard and deactivate the safety before you can trigger the saw blade.
The process is not complicated and similar to almost any power tool that contains a trigger on the handle, such as a hand saw, jackhammer and power drill, etc.
Miter Lock Handle
A miter lock handle is the kind of handle that is used to turn the entire saw assembly and the circular work table lying below.
This miter lock handle contains a locking mechanism that is very useful when it comes to locking the saw in one position at the desired angle
The upgraded versions of miter saws consist of a thumb-activated release and latch mechanism which rapidly and effortlessly adjusts and maintains angles when you press it with the thumb.
Almost every miter saws also have positive stops at the most frequently used angles.
Dust Collecting System
A high functioning dust collecting system is essential to have in your miter saw.
An efficient dust collecting system is responsible for collecting all the sawdust and airborne particles from the air.
This keeps the workspace clean and tidy. The neat environment provides peace of mind and better work efficiency.
The capturing of sawdust, residue and particles also keeps the measurement scales clear and visible for an accurate reading.
Types Of Miter Saws
Just like any other power tool, there are several different types of miter saws commonly available in the market.
The releasing of several identical miter saws confuses an average user in selecting the best one for use. Different people have different needs varying from saw size, blade size and power.
Regardless of the money, some people prefer small, compact and less powerful but cordless miter saws so that they can carry it from place to place.
There are four main types of miter saws
Basic Miter Saw
A basic or a standard miter saw is considered to be one of the most inexpensive and cheapest of all miter saws.
It is designed to perform two types of common cuts, such as crosscuts and miter cuts. These miter saws are also capable of dealing with most DIY projects and home improvements.
A basic miter saw is lightweight, compact and easy to carry. Due to its not so complex construction, this miter saw stays stable and firm when cutting.
If your intentions are to cut and to size up the fences of your house, cutting some pieces for the table, or simply just performing cuts across the entire width of the board, then you do not really need the bevel cuts.
All your work can be done with this basic miter saw. This ideal tool is useful for beginners in the woodworking industry as these saws wind u great amount of work in less complexity and time.
By using a basic miter saw, you will eventually achieve more précised, accurate and cleaner crosscuts.
Basic miter saws are capable of performing slightly more précised and accurate cuts than an expensive compound miter saw.
However, basic miter saws cannot deal with the work of framing and crown molding as they are not meant for this purpose.
The reason behind this is that these miter saws are designed to be accessible and cheap to the average carpenter who cannot afford heavy-duty power tools or for someone who just entered this field and needs lots of practice.
Bevel Miter Saw
A bevel miter saw is another kind of miter saw that is easily found in woodworking shops. These saws are also commonly known as compound miter saw.
The reason behind calling them compound miter saws is that they can easily achieve compound cuts.
Just for you to know, compound cuts are the types of cuts that are a combination of both bevel cuts and miter cuts.
A bevel miter saw is different from a basic miter saw because it has a pivoting saw motor head unit.
This pivoting motor saw head is located on the saw that easily rotates and spins the saw along its horizontal axis.
In this single bevel, miter saw, the saw head can rotate in one direction particularly. This ultimately means you can only set positive stops of angle on the bevel scale.
A single bevel miter saw is best when you really do not require many bevel cuts.
However, this power tool cannot work on a large scale, crown moldings or framing. Also, this miter saw will require you to flip over the board and reposition it to perform cuts in the other direction.
Dual Bevel Miter Saw
A dual bevel miter saw is one of the most versatile power tools that were ever released. These saws can handle almost every sort of work by their high efficiencies.
The unique part about these saws is that the saw head can swivel both ways. The head can be tilted towards both left as well as the right direction.
This is swiveling on both sides allows you to perform several miter cuts by using both positive and negative angles on this saw.
This opens a large cutting capacity for the miter saw, enabling it to easily do crown molding, bevel joints, framing, etc.
A dual bevel miter saw eliminates the extra work of flipping over the board to perform cuts in the other direction.
You do not have to reposition it in the opposite direction every time, thanks to its tilting saw head. This helped and minimized the chances of misplacing the cut and saves a lot of time.
The fact that a dual bevel miter saw is twice as fast as any other miter saws when it comes to cutting certain types of bevel cuts makes it even more demanding.
These types of miter saws are a great deal if you intend to perform a whole lot of framing or crown molding.
Sliding Dual Bevel Miter Saw
A sliding dual bevel miter saw is the most advanced and upgraded version of a miter saw that is highly equipped and well-functioning.
This innovative miter saw has a type of sliding tube mechanism that assists the saw and motor in sliding back and forth across a wider piece of wood.
This type of saw is great for cutting larger and broader pieces of wood in one swing that cannot be cut by any ordinary saw.
In order to enable you to cut wider boards, the saw will swing across the entire length of the board. This will automatically deliver wider samples of crosscuts and miter cuts.
This tool is ideal and useful in many situations, including when you need to cut large fences of 8 inches width, cutting across the surface of widths equal to the blade, or performing cuts larger than the blade size.
Best Miter Saw For The Money
Hopefully, by now, you know all the necessary information regarding the miter saws and their working. After, that it is crucial to have a look at some of the best miter saws for the money.
Buying exceptionally expensive miter saws do not guarantee high efficiency and functions.
Some of the reputable manufacturers of miter saws with unique models under budget are DEWALT, Makita, and Bosch.
Each manufacturer specializes and stands out in certain areas for particular reasons.
For instance, the famous brand DEWALT is known for featuring some of the best and high-quality motors that are powerful enough to deal with any sort of cuts.
On the other hand, Makita miter saws consist of the upgraded and most advanced sliding rail systems.
Similarly, the brand Bosch offers a strong built for its power tools with excellent warranties and additional features such as integrated suction systems for clearing up sawdust and laser-guided blades, etc.
All these are under budget.
Best Miter Saw For The Money, Save Yourself Some Cash
Finding the best miter saw for the money can be quite confusing and frustrating. It can consume a lot of time and energy. You might feel stuck between so many options.
The identical models with slight differences that are also under budget may leave the experience of selecting quite daunting.
In short, to make the purchasing easy, you should be aware of your needs, requirements and nature of work.
For making this process further easy, you need to make sure of a few things. There are different requirements for both beginners and a professional.
You should know where you stand. If you are a professional woodworker that deals with lots of cutting projects and cuts quite frequently and they change on a daily basis, then you should select a miter saw with more features.
For heavy-duty projects, invest in a miter saw that is high quality with the feature of sliding.
For professionals who require miter saws for similar projects frequently like trim work, a basic bevel miter saw might be ideal.
Just similarly for a hobbyist who works with different small projects on a daily basis, just a basic single bevel miter saw will do great.
It will fit in perfectly for fulfilling all the needs along with portability and compactness. Miter saws have different prices ranging from $200-$800.
So look for one within this price range as we have previously mentioned that exceptionally expensive miter saws do not guarantee high functionality and accuracy just like very cheap ones don’t.
You certainly do not want to overspend $800 for a saw when the $300 model fulfills all your needs.
Things You Need To Know About The Best Miter Saw
A miter saw is a common need for any woodworking shop. A lot of wood cutting projects are dependent on miter saws.
This is due to their versatility and various abilities to tackle tasks hassle-free. It is used to perform several crosscuts at a comparatively faster rate.
Miter saws are ideal for those carpenters and woodworkers who typically handle projects with deadlines.
This is because a miter saw works faster and lets you complete the work instantly. Most commonly, a 10″ miter saw is used. This saw will perform sufficiently enough for almost all of your projects.
On the other hand, a 12″ miter saw is used to increase the cutting capacity when it comes to cutting big or complex projects.
If somehow you are not sure about which one to choose, we recommend you to select a 10″ miter saw first so, that you get complete hold over it.
Usually, when you go to buy a miter saw, you would find four main types of miter saw. For a wider versatility in cutting, a compound miter saw is used.
It comes with two bevel options that are single and dual. This specific type of miter saw is efficient enough to perform three types of cutting three types cuts; crosscut, miter cut, and bevel cut.
This type of miter saw can be slightly tricky and complicated to operate. Hence, you need to have some patience and practice while you master the skill of using it.
There are two further types in this saw; corded and cordless. You must know what a corded miter saw is.
However, a cordless miter saw is lightweight, free and convenient when you intend to use it for remote work areas.
We recommend beginners to get their hands on a basic miter saw first so that you can perform small wood projects.
How To Choose The Right Miter Saw
As mentioned above, there are four types of miter saws. Each of them is used for specific work. Different carpenters have various projects using them.
You need to gather all the basic information regarding them so that you can easily choose one.
However, you cannot solely make a purchase decision based on the information of the models alone.
You should know about the different types of blades, blade sizes, tooth count and if the miter saw is corded or cordless models.
Here are a few features to consider before choosing the right miter saw
Selecting The Blade
Owning a blade made for the nature of your task is crucial. There are different types of saw blades for different miter saws, which are entirely made according to them.
These blades have different sizes and are made up of different suitable materials. It is also true that each different part of the blade can be made from different materials.
The tooth count of each blade can also differ. There are blades specially designed to have tooth count, particularly to do crosscutting, metal chopping, etc.
In order to choose the right blade for your miter saw, you need to go read further.
Tooth Count
Typically when it comes to cutting finer cuts, a saw blade with more teeth is used. This is because a blade with a high tooth count yields better results than with a more teeth blade.
On the other hand, the blades having few teeth are considered ideal for clearing material rapidly. This results in comparatively faster cuts.
You will eventually determine that crosscut saw blades take lower rpm than ripping saw blades. This is because of more cuts per rotation slower feed rate.
Similarly, in the case of wood ripping, a 10″ blade that has been designed specifically for this purpose will have few teeth, like 24 teeth.
The main cause behind having few teeth is that the main aim is to remove wooden fibers along the grain rapidly.
Just like that, if you use a crosscut blade, you will observe more teeth. Also, the blade will deliver refined cuts along with right angles to the grain.
You can find up to 80 teeth in crosscut blades. Eighty teeth mean you will achieve refined cuts at a lower rate.
This is how you need to figure out what tooth count suits you better.
Tooth Design
After the tooth count, what comes next is the tooth design. While you might think of this point as not so important, but tooth design does hold some importance and directly influences the quality of the cuts.
The cleanliness and neatness, along with the accuracy of the cuts, depends on the shape of the teeth and the alignment.
This also drastically affects the speed at which the saw blade cuts. There are several types of blades available in the market for various purposes, such as ripping, laminating, crosscutting, etc.
To know whether a saw blade is good for you, here’s a list:
- Flat top teeth
- Alternate Top Bevel (ATB)
- Combination tooth
- Triple Chip Grind (TCG)
- High Alternate Top Bevel (Hi-ATB)
Single Bevel Or Dual Bevel
For deciding whether to get a single bevel or dual bevel miter saw, you need to think about how frequent you will need to perform the opposing miter cuts.
If you own a workshop and mostly work with crown moldings and framing, then it would be a great deal and wise decision to invest some cash in a good quality dual bevel compound miter saw.
A dual bevel miter saw delivers fast cuts and will save you a lot of time and effort while creating opposing bevel cuts.
This miter saw helps in achieving consistent cuts that are less prone to error.
However, if you primarily work between crosscutting and basic framing only along with very less occasional bevel cuts, then a single bevel miter saw would be the right choice.
Corded Or Cordless
Selecting a corded or a cordless miter saw entirely depends on your work requirements.
If you work mostly in remote areas and faraway places and need to switch places quite often, then a cordless miter saw would be ideal.
It uses the same energy and delivers the same quality cuts as compared to the corded one but being portable.
Corded miter saws are comparatively lightweight and use battery rather than energy from the electric power supply.
You can slice pipes, metal tubing, sheets, and wooden boards in a short time. Also, there is not a huge difference in the cost of both.
Fixed Or Sliding
Sliding miter saws are considered more versatile and durable when it comes to cutting extended quality cuts.
This is because the moving saw head slides over the entire length of the board, executing wider crosscuts. This makes the process of resizing and re-edging easier.
A sliding saw miter saw can easily wind up a great amount of work that includes cutting tabletops, bed panels, door panels, extra-wide fencing, etc.
these saws can also achieve bevel cuts and miter cuts apart from the typical crosscuts.
Not only this, but a sliding miter saw will also reduce the effort of flipping over the board to perform cuts in the other direction due to its tilting head.
However, fixed miter saws are limited and restricted as far as the cutting is concerned. You cannot really move the saw; rather, you can readjust and move the working material.
Extra Features And Safety
It is crucial to look for additional features in your miter saw in the provided budget.
There are some miter saws in the market that come with really amazing features such as laser guides, dust collection ports, blade guards, etc.
As far as your safety is concerned, keep in mind to look for such models that provide exceptional protection.
A high-end product does not guarantee high-end results. This is why searching for a product that has extra features to make your work easier.
Apart from installing safety features in your saw, ensure to implement some of the external safety features as well, such as safety goggles, ear muffs, etc.
Conclusion
We have gathered all the possible information regarding the best miter saws for the money.
The top 10 best miter saws for the money review will assist you in selecting one according to your choice.
It is necessary to look for miter saws that are not a burden to your pocket and also feature great functionalities.
Make sure to go through the article to know more about the miter saws, including their usage, functions, features and what to consider before buying the right power tool for you.
FAQs
Q1. What Is The Best Miter Saw For Home Use?
Ans. There are a few miter saws by reputable brands that are ideal for home use:
- DEWALT 12-Inch Single Compound Miter Saw.
- Metabo 12-Inch Dual Compound Miter Saw with Laser.
- Hitachi 10-Inch Single Compound Miter Saw with Laser.
- DEWALT FLEXVOLT Double Bevel Sliding Miter Saw.
Q2. Is A Sliding Miter Saw Worth It?
Ans. The worth and demand of a sliding miter saw depends on your work requirements. If you frequently work for wooden projects dealing with miter cuts and bevel cuts in large and wider boards, then a sliding miter saw is totally worth it. It is definitely ideal if you make frequent use of it.
Q3. Should I Get A 10″ Or 12″ Miter Saw?
Ans. The selection of either of the miter saws is totally dependent on the nature of your work. A 12-inch miter saw is powerful, having large cutting capacities. Moreover, they are expensive and very high maintenance.
On the other hand, 10 inch miter saws have a huge variety of blades that are proven to deliver smoother, rapid, and refined cuts.
Q4. Are Miter Saws Dangerous?
Ans. Every other power tool is dangerous due to its high power and fast-spinning blade. A miter saw is an equally dangerous tool. It can cause several injuries and accidents if it is used freehand or recklessly. However, you need to install all the safety features along with following the safety and operating instructions to make proper use of it.