Are you planning to purchase a miter saw for your home decoration project or wood workshop?
Miter saws are considered an essential tool for crown molding, base molding, cross angled-cuts, and fine-tuning of your furniture.
You can never run a wood workshop without having a properly functioning miter saw to render different jobs in your hands.
The problem is miter saw market has expanded to dozens of brands and hundreds of different products. These products, though, got different names, but seem to work the same.
So, how could you roll your hands onto something quality as per your needs?
In this read. I am going to share a list of the top miter saws according to industry experts. Some miter saws are good at angled cuts, some at woodworking, and others are good at any other specific type of job doing. It is upon your needs what decide the best product to go with.
The list is created after hours of research and experts collaboration. So without further ado, here are the 10 best miter saws that you should consider in 2023.
Best Miter Saw Reviews 2023
- BOSCH GCM12SD 12 Inch Corded Dual-Bevel Sliding Miter Saw
- DEWALT DWS779 12-Inch Sliding Compound Miter Saw
- DEWALT DWS716XPS 12-Inch, Double Bevel XPS Cutline Miter Saw
- Metabo C10FCGS 10-Inch Compound Miter Saw For Large Table
- Hitachi C10FCG 15-Amp 10″ Single Bevel Compound Miter Saw
- Delta 26-2240 10 In. Dual-Bevel Sliding Cruzer Miter Saw
- DEWALT DWS715 12-Inch Single Bevel, Compound Miter Saw
- DEWALT DCS361M1 7-1/4-Inch Cordless Miter Saw
- MILWAUKEE’S 2734-20 10″ Dual-Bevel Sliding Compound Miter Saw
- DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw
1. BOSCH GCM12SD 12 Inch Corded Dual-Bevel Sliding Miter Saw
- Axial Gliding Systems
- 60 Tooth Bosh
- Better Dust Collection
- Quick & Accurate
If you are looking for the best replica of your hard-earned money, get Bosch GCM12SD. The double bevel compound miter saw would not let you down with its performance as well as built quality.
This miter saw inherent many exiting features, including axial gliding systems. The axial glide system is an excellent and handy way to get the right use of a miter saw.
The system does not use the old rail system, which gets messed quite easily and requires maintenance to keep working on. The system allows the saw to sit against the wall, and save an extra 12-inch of space in your workshop.
The setup of the Bosch GCM12SD is more like a breeze. You do not have any need to hire professionals to assemble it or get the setup done. It requires minor alignment, and you see it get set up.
It integrated a square lock fences system, which comes aligned at 90-degree to the table and demands no further adjustment, just use it right the way it is. The fences make it easy to use the blade in the direction and position you want with the right alignment.
The saw comes with a 60 tooth bosh carbide blade, which renders in swift and fast cutting. The blade is very smooth and provides optimum cut quality with smoothness required in the cabinet, carpentry, and furniture work.
If you are decided to get the miter saw onboard, it would be ideal for connecting a vacuum for better dust collection. The saw is big enough to be called and used as a workshop miter saw rather than a home or DIY using saws.
In a nutshell, the Bosch GCM12SD checks all the right boxes and falls right on a criterion of a general miter saw, renders quick performance with ultimate accuracy and precision.
2. DEWALT DWS779 12-Inch Sliding Compound Miter Saw
- 12-inch Dual-Bevel
- Great Build Quality
- Latest Dust Collection System
- Work Smooth as Butter
DEWALT 12-Inch DWS779 miter saw is one of the best 12-inch double bevel miters sliding miter saw you can have. It comes with a 15 amp motor and outperforms its competitors.
This miter saw is sturdily made and renders performance as per the user’s expectation. At all, it is a Dewalt built, and we know the Dewalt products are made to last.
The sturdy made saw would not break during the normal as well as high usage. It is capable of cutting through 16-inches deep in the cross-cut without going through any big trouble.
The back fences are designed to hold bulky workpieces; it ensures that you can cut through molding and baseboard. The saw is an ultimate please to work with; it works smooth as butter.
Whether you are looking for a tool to run your woodworking services or a tool to construct your home or furniture, It will not let you down by any side and fits in every condition.
It’s super-efficient and the latest innovated dust collection system grabs around 75-percent of the total dust. You will have your space as cleaned as it was before starting the cutting job.
3. DEWALT DWS716XPS 12-Inch, Double Bevel XPS Cutline Miter Saw
- XPS Technology
- 15 AMP Motor
- 3800 RPM SPeed
- 14 Positive Stops
The Dewalt is come up with the updated version of DW716XPS. You might have been using the product; the saw is competent and delivers optimum performance.
The updated version looks almost identical to the previous version, but some small necessary changes made it to the ways. The brand updated the visibility bevel scale and added longer base legs.
You will experience an advanced vertical quick clamp system and an updated dust collection system. The Dewalt latest entry to the 12-inch double bevel compound miter saws comes with a 15 amp motor that renders 3800 rpm spin.
It comes with 10-inches horizontal baseboard cutting capacity and two by 8 or 2 by 10 cross-cutting ability. The saw comes with 14 positive stops; the stops are adjustable stainless steel miter detent plates.
The most visible difference in the new addition is a dust collection. You will have the collector closer to the blade; this helps to collect more dust collected sent to the dust bag. The dust collection is always problematic in miter saw; it looks like Dewalt found an improved way to get this done quickly.
4. Metabo C10FCGS 10-Inch Compound Miter Saw For Large Table
- 5000 RPM Speed
- 15 AMP Motor
- 24.3 Weight
- Thump adjustment levers
This 10-inch miter saw is priced pretty affordable range and features everything needed. The inexpensive price range does not mean the saw lacks in quality or performance; it is built simple and comes in handy when we use it.
Reliability and precision were the entire focus when the brand designed the product. You can go through any type of cuts like cross cuts, bevel cuts, and compound cuts quite easily. The Metabo C10FCGS is considered the best for remote location jobs. Its 24.2 weight adds to accessible transport, and you would not feel the weight of it.
It features a 15 amp motor that generates speed with 5000 rpm for your desired types of cuts with ease. The saw also integrates a bevel that renders cut from 0-45 degrees to the left.
The precision and accuracy are what make this saw stand out, and you will have an error-free smooth cut through your workpiece. The simple thump adjustment levers render a quick set at various miter angle stops.
With a broad and large table, added clamping system, you will see the workpiece would never be able to slip, and you get a safe and secure working experience.
5. Hitachi C10FCG 15-Amp 10″ Single Bevel Compound Miter Saw
- 3800 RPM Spee
- 15 AMP Motor
- Collects 80% Dust
- Error-free Performance
If you are looking for a miter saw to get various kinds of different jobs done smoothly, have something akin to Hitachi C10FCG. The product is not rated as the most powerful miter saw but renders smooth performance among 12-inch bigger-sized miter saws.
You will love to see it going through different jobs smoothly, without a single hiccup. The miter saw features a 15 amp motor that renders 5000 rpm speed.
This miter saw is a hands-down option for trim carpenters, framers, and woodworkers with demand on precious, reliability, and error-free performance.
You can have the miter saw on even the toughest cutting jobs; you will witness any kind of woodworking with zero issues. It comes with an integrated dust catcher, which will save your environment from turning it to be garbage.
The Hitachi C10FCG collects about 80 percent of the total dust, incredible in collecting dust. The miter saw comes with easy-to-transport features. The model is lighter than its predecessor, lightest in the compound miter saw class.
The large table with a clamping system is the star of the show, holds your workpiece tight, and lets you decide which corners to trimmed safely. The thumb actuated positive stops for quick miter adjustments allows you to have simple miter adjustment for better cross and beveled cuts.
The bevel angle is 45-degree to the left to get clean bevel cuts. 0-52 degree miter angle range allows you to have a maximum of the 2.57hp miter saw. The saw comes in hands at a very affordable price than Bosch and Dewalt. Yes, the build quality does not match the level of the mentioned top brands, still, at a price, you cannot have any other brand coming with this range of features.
6. Delta 26-2240 10 In. Dual-Bevel Sliding Cruzer Miter Saw
- Innovative Design
- Cross-cutting Up To 16 Inches
- Adjustable Bevel Control System
- Powerful & Accurate
Whenever a pro purchase a miter saw, the yardstick always be power and accuracy. Whether the power tool falls right on the criterion of power accuracy?
If it is, the next features come to the watch list, but in the absence of any of the two, the tool becomes useless. The delta Cruzer comes with enhanced features that produce plenty of power to handle any kind of task.
The delta Cruzer boasts the most extended cross-cutting possibilities in its class, and its drop-down fence system lets you cut even further. The option requires a mild piece of lumbar to work with; the option does not fall right for everyone, the personal preference.
Another fantastic feature is its full-front adjustable bevel control system. The bevel system is a breeze to use, has enough friction unlocked to keep the saw head slipping too quickly, and locks at the desired angle.
The guide arms or Delta names them with Robot arms are helpful and stable. I loved the travel tension, and the thing moves when you breathe on it. The delta Cruzer renders optimum performance in cross-cutting up to 16 inches. The broader cuts get smoother with the delta Cruzer, like the way never before.
The saw also supports crown molding up to 6.25 inches. Just flip down the slide lock and have accurate cuts crown and other trim pieces.
The innovative design lets you cross-cut and does your woodworking in the back control of your wasted work area and gets things to go smoother.
7. DEWALT DWS715 12-Inch Single Bevel, Compound Miter Saw
- 4000 RPM Spee
- 3 years Warranty
- 42 Ponds of weight
- Good At Providing Bevel Cuts
If you are looking for a professional miter saw under a budget price bracket, look no further Dewalt 12-inch DWS715 is there to help you out. A grand saw to go with at a low price range renders reliable performance with a solid cut for half the price. The saw comes with a lot of features to go with, such as compactness.
It has a total of 42 pounds of weight, small-sized compare to the others, the size lets you stow it away nicely in any garage or shed. It comes with a 15 amp motor that can run up at 4000 rpm speed. The added 12-inch carbide blade helps you go through any project a breeze.
The saw is good at cross-cutting, molding, miter cutting, framing, and lots of others. The options more often are used and taken by a DIY enthusiast, a useful saw with a vast range of performance at half a price.
It comes with 11 positive stops; it can cut through up to 6 1/2 inches in base molding vertically and 5 1/4 into crown molding nested. With cross-cutting capacity up to 2 into 8 inches, long lumbar makes it a viable option to go with. It is good at providing bevel cuts to the left up to 48-degrees and 3-degrees to the right.
You will be able to change the position as quickly as possible without any big trouble. The tool might not be that good for the job site or a professional who goes through a load of woodworking. The saw quality is excellent with a 3-years warranty that will make you have peace of mind.
8. DEWALT DCS361M1 7-1/4-Inch Cordless Miter Saw
- Cordless
- 4 AMP Battery
- Comes With Laser
- LED System
Cordless saws are the future of the miter saw market. These new cordless saws are beginning to gain momentum; very few brands have their representation in the cordless category. Dewalt 20V is the newest model, sort of among pioneers in cordless miter saws.
Dewalt decided to come up with 7-1/4″ blades on their cordless miter saw. The professionals mostly appreciated the move as they are much easier to get hands-on, cheaper than the 8-1/2″ and compact as well.
The slightly smaller blade is more efficient, has less weight, and many more compact features onboard. The latest entry to the cordless miter saws, Dewalt 20V, is a sliding type miter saw, I am pleased to see this particular feature.
Build quality is as par; you will have an enhanced lifetime with the miter saw. The miter saw runs with a battery; the battery-operated miter saws are compact and good at remote site jobs. The performance of the miter saw is excellent, as per the battery run time is concerned, Dewalt claims it can get up 183 cuts in 2 x 4 pine with a single 4 amp hours battery.
In order to render precision, the saw features an LED that helps the blade cast a show on the cut line. Though many brands come up with lasers that can be adjusted when it comes to accuracy, still the shadow system is workable and did a fantastic job.
9. MILWAUKEE’S 2734-20 10″ Dual-Bevel Sliding Compound Miter Saw
- Cordless
- 9 AMP Battery
- 45 Pounds of Weight
- Cam Locking System
Corded miter saws take tons of power, as soon you start cutting with the miter saw, you see the lights dim or generator kick up option. With the announcement, Milwaukee is coming with a cordless miter-saw, wood-working enthusiasts were happy to roll hands onto something powerful yet consume a less range of power.
The saw comes with a high demand for a 9aH battery, and the battery is a part of the M18 platform. With the battery on board, you make up 400 cuts in 3-1/2 inches baseboard trim, 300 cuts through 2 by four lumbar. As for the other tools, the M18 miter saw comes with all standard options that other miter saws got.
The enhanced or advanced features Milwaukee added are adjustable stainless steel detent plate, 11 miter detent location, nine bevel detent location, cam locking system, bevel adjustment, miter lock, and trenching abilities.
Speaking about its maneuverability and transporting, Milwaukee did a fantastic job. The saw weighs only 45 pounds, not that heavy, as you would have thought. The saw integrates a top handle, and two side handles to make maneuverability possible without any big hiccup.
Another exciting feature the cordless Milwaukee miter saw features is the dust management system. I have seen a mind-boggling dust collection and management system
10. DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw
- 3800 RPM Speed
- 15 AMP Motor
- Excellent For Woodworking
- XPS LED System
One leader of the woodworking tools, the company which stands heads and shoulders above the rest, my answer would be Dewalt. The brand by time has proved itself a world leader in wood-working tools, and their Dewalt DWS 780 is the leader of dual bevel compound miter saw.
The brand put lots of power and paid huge cheques to designers to come up with an out-of-the-box design. The design renders optimal usage and makes it the ideal reliable beast to get the wood-working job done. Dewalt has added many advanced features to the model, renovate the design as well.
It looks different than the previous version, the power cord and dust tube now go along with the dual slides, which make it a comfortable device. The power chord would not be handed down from the motor; it causes a huge mess when cutting extreme angles.
The start of the show feature of it would be the XPS-led system. It cast a shadow on the blade from both sides and renders optimum performance to cut a workpiece. From now on, in low light conditions, no guessing, you would exactly know where the blade is going to chop off.
The laser system is going obsolete now, and many leading brands are coming up with the same idea, the XPS led system is convenient and sets the angle when you want to cut. Dewalt DWS780 integrates a 15 amp motor that renders 3800 rpm speed to cut through anything you throw at it.
The back fence design cuts of 2 by 16-dimensional workpiece at 90-degrees, two by 12 at 45-degrees. It comes with ten positive stops, that improve productivity and help you go through feeding efficiently.
A Complete Miter Saw Guide You Need!
I have penned down a list of the best miter saw in various categories. You can have any of them after reading their features and other functions. But, the problem is, sometimes, a user does not know what features are useful in doing a particular job.
Like, whether a corded miter saw is best suited for him/her or a cordless one? In the same manner, many other features come their ways, and they are unaware of advantages and disadvantages.
Here in this section, we are going to elaborate, different features and specifications with their benefits and drawbacks. By reading this section, you will be able to analyze which things are best suited for the type of load you go through.
Types OF Miter Saws
Before making any purchase, you should know the types of products available. If there is more than one type of product available, you should first know what type of products fit in which kind of work.
This choice will help you in making a better decision and help you avoid picking a useless tool.
We have three types of miter saws on the market, and all three of them fit in different work needs categories.
- Basic miter saw
- Compound miter saw
- Sliding compound miter saw
Every one of them has some particular features that others skin; you need to understand the pros and cons of every tool before you give a final call.
1. Basic Miter Saws
As the name describe, the saws are good to go for a primary type of work. You cannot rely on them for complex and more significant projects.
The saws are good at providing basic and simple cuts or miter cuts. The saws do not come with advanced level cutting such as bevel cuts or fine-tuning in woodworking.
The basic miter saw is ideal for the beginner, for carrying out the casual type of work in wood-working, like cross-cutting through a small lumbar. The saw also falls right for you if you want to remodel your home or use it to repair it from time to time.
They are good at necessary cutting through the material. This miter saw provides impressive accuracy, and the saws come in hand at a cheaper price range.
2. Compound Miter Saws
Now, we come to the second category, ‘Compound miter saw.’ These saws are an advanced version of basic miter saws, to handle the projects what a basic saw cannot handle.
The compound miter saws are best at making bevel cuts for a wide range of angles. With the compound miter saw, you can make miter cuts, angled cuts or bevel cuts, and crosscuts.
The bevel or angled cuts are the most demanded cuts which are done by adjusting the bevels using a compound miter saw.
This feature is more comfortable to call a more flexible and advanced version of saws, which helps you in getting angled cuts without any significant issue. Compound miter saws further come in two categories. Some of them are dual bevels, and some are single bevels.
We will discuss the difference in the end part of the section, and you will learn the types of bevels compound miter saws have and how to get the right use of them for different woodworking projects.
3. Sliding Compound Miter Saw
The last and most advanced form of a miter saw is, sliding compound miter saw. If you are a professional craftsman or woodworker and spend most of your time doing professional-level projects and got a load of work to go through daily, the sliding compound miter saw is the type you should buy.
The type of miter saw comes with a sliding hand to cut through different wood materials with ease. The sliding hand goes back and forth and helps you cut through any width of the material that a compound miter saw cannot.
Compound miter saws can cut through any width of the material, but you will have to flip over the workpiece. Here in the sliding compound miter saw, using the sliding hand, you can reach any width or thickness of the wood. If you do necessary miter cutting, you should not invest in buying a sliding compound miter saw.
The types of miter saws are more versatile than any other tool and equipped with the advanced features the rest of the lack of the kind. They are more expensive and come in hand at a reasonable price.
4. Cordless Miter Saws
Cordless, as the name speaks, comes without the cord power system. The power cord system is beneficial if you have a shop and use to carry out your wood-working getting power from electricity.
The cordless saws are taking the miter saws world into the storm. These come with batteries as the power source to run them. Having a good-sized and quality battery is an important indicator to look into a cordless miter saw.
Today’s cordless miter saws come with Lithium-ion battery technology, offering more battery capacity than the previous version of the batteries. The latest technology-developed batteries provide the advantage of full power until you reach the point where they can no longer control the saw.
The cordless saws are great for remote location jobs. If you know that at a location, the power supply wires would be unreachable; having a cordless saw fills the bill. But, the limited power supply stored in the batteries is the biggest issue; the cordless saw cannot match the power provided by the direct power supply.
5. Single Bevel Miter Saws
While working out on a project, you need some angled cuts in two directions. Such as if you are going to build a picture frame or crown molding, the single bevel miter saw comes into use.
The single bevel saw has a pivot function to make the angled cut possible either to the left or right. The single bevel miter saw makes bevel cuts only in one direction, and this is where the saw gets its name.
Its titles are in one direction, in most cases to the left, in case of making bevel cuts on both sides of the workpiece, you will have to flip over the lumbar physically.
6. Dual-Bevel Miter Saws
As I mentioned in a single bevel miter saw a section that using a single bevel saw you would have to flip over the workpiece repeatedly physically to get cuts.
If you are a professional woodworker or even a hobbyist who is working on a project with a strict deadline, you will not be able to flip the material over and over again to have cuts.
With a dual bevel miter saw, you never have to flip and rearrange the workpiece to make bevel cuts. This quality is the only feature that sets a double bevel apart from the single bevel.
The design of the saw allows it to tilt to both rights and left so that you can make matching bevel and miter cuts on both sides. The double bevel is most used and followed by miter saws and quite handy as well. It makes the tasks more comfortable and makes you finish the project faster.
Single Bevel Vs Dual Bevel Miter Saws
As the name speaks for the work, the single bevel miter saw tilt in one direction. The single bevel saw likely to pivot in one direction left or right.
With the single bevel saws, you would not be able to pass through a 90-degree vertical angle. If you want to make a bevel cut in the opposite direction, you will have to flip the workpiece and saw it again in the same direction.
Single bevel miter saws are good at cutting across the thickness of the wood.
The dual or double bevel miter saw the title in both, left and right directions. It pivots both left and right and makes cuts on both of sides without flipping over the lumbar.
Like, if you want to have the same cut on the same workpiece, the wood remains on the machine, and you just swing the blade in the other direction. A dual bevel is a tool for professional craftsmen.
This dual bevel saves your time because you would not repeatedly be flipping your wood piece back and forth. Both tools are good at a particular job.
Amateurs and DIA Years would need a single bevel as it is easier to handle. The dual bevel is an advanced form and helps the professionals to carry out their job without getting slow down.
Corded Vs Cordless
Corded miter saws need a constant electricity supply. They come with high power-consuming components and are good at carrying out a high load of work.
They are often appropriate for use in big factories, commercial wood shops, and similar places. They cannot be taken around on remote jobs.
They lack free movement, and if you got the courage to have them moved, you would need electricity wires to power the device. This problem is a real pain in the neck.
As they consume high power, generators are often incapable of producing the range of power. Corded miter saws are better at doing the big, bulky projects and are four times forceful and powerful compare to cordless.
The problem is, they run on electricity, if the power goes, there will be an extended downtime. On the other hand, cordless miter saws are good at transporting.
They run on the battery operating system, which you can charge. They can be taken anywhere, good at remote jobs. They are often lightweight, easy to maneuver.
You need to have the batteries fully charged. If you do not have a fully charged battery, you would not be able to do your jobs.
Yes, they are less powerful, and the battery drains swiftly. If you are desired to work on cordless miter saws for an extended time, you should carry an extra pair of Lithium-ion batteries.
Sliding Vs Non-Sliding Miter Saws:
A sliding miter saw will allow you to have miter cuts by using the sliding motion of the blade. The sliding miter saws use rail to move back and forth.
This rail allows cutting through thicker and heavier materials. The saw can cut with all accuracy of the standard miter saw, with added versatility.
The saw is capable of cutting fine corners; a user may need in particular projects. You will love to have it as it cuts longer length with sliding, and you do not need to flip the material to continue the job.
On the other hand, the non-sliding miter saws refer to the compound saw pivots in both directions and renders angled cuts and miter cuts. The saw can give beveled cuts in the desired direction; you get cuts on both axes of the saw.
The nonsliding miter saw is good at large range applications. It got the ability to render beveled cuts, an excellent option to create corners that need to fit together.
The corners more than often halt issues; they should be cut precisely and requires planes to join the corners.
Types of Blades
Getting the right, smooth, and error-free cuts largely depend on the miter saw’ blade. There is no shortage of quality options in the blade world; a large number of options available even confused an experienced person.
You should learn which type of blade would go right for what kind of work. You should be aware of the type of blade your saw can use; some blades are appropriate for a particular saw.
So, you want to get the right blade for the tool; the wrong type of miter saw blade would render poor results. Let’s unearth the types of blades a user should use for a particular work type.
Also Check: 10 Best Miter Saw Blade Reviews 2023
1. Stamped Blades
Stamped blades are considered the best option for coarse cutting and large volume or load of work. The blade is not an option to get excellent cutting, base molding, or crown molding.
You can have the blade onboard for the sheer amount of work in the pipeline. The blade is metallic that is molded and then stamped out of the circular mold.
2. Laser-Cut Blades
Laser-cut blades are used to render excellent cutting than stamped blades They are considered best for more delicate cutting, molding, base molding, and crown molding are best to get done using laser-cut blades.
The blades are made using laser light for cutting the circular blades. The laser-cut blade will have the advantage of harder steel built.
Sawtooth Profile
Miter saw uses circular-shaped blades that go through the workpiece into the surface in slow motion. You get straight, uniform, and precise cuts every time. So, when we are talking about the sawtooth profile, we are referring to the development of the cutting surface.
You need to look into the geometry of the blade; the TCG blade surface is the most used and followed around the world. TCG blade type helps you go through every kind of wood, irrespective of hardwood, softwood, or non-ferrous metals.
Tooth Count
The effectiveness of the blade is directly proportional to its tooth count. It is among one the critical factors; one must look into while purchasing a blade or a miter saw.
The higher the number of teeth in a saw, the cleaner, and smoother results it will deliver. But, a higher number of teeth cannot go through thicker material, or they will take more time to reach the next street.
Thicker material cutting through requires few teeth count. The bigger and larger size of the blades comes with a high number of average tooth counts.
In a 12-inch size of the blade, there should be at least 80-100 teeth to get a smoother finish. On the other hand, in an 8.5 inches blade, there should be only 60 blades.
Hook Angle
The hook angle is the angle at which the saw blade will meet the material to cut. The high angle in the hook means the tip of each tooth will engage with the material aggressively.
On the flip side, the smaller or negative hook angles refer to less aggression or bite. A low or negative hook angle blade is considered suitable for sliding miter saw, or radial saw, as it prevents overly fast feeding. On the other end, a high hook angle is suitable for a table saw, here we need a faster feed rate.
Saw Blade Teeth Quality
The teeth in most of the saw blades are thicker carbide tips made of high-quality steel. The teeth quality determines how long the blade will stay sharp.
How cleanly it will cut through different materials, and how many re-sharpening the blade will have. The variety of cutting tips decides the life of your blade, and miter saw.
The top-notch company formulates the blade specifically for the application of the blades, the next advanced steps such as tri-metal and others, add an extension to its overall life.
Types Of Cuts
There are three basic types of cuts a miter saw can complete without any hiccup. Use of different types of saws or tools to make these basic cuts make things difficult and complicated.
The saw is not merely limited to these cuts, but the primary objective is the these three cuts
1. Crosscuts
Crosscuts are the most simple and basic 90-degree cut. This particular type is a cut where you cut a board in half. In order to cut a board in half, the miter saw will always be the best choice.
Just put the board under the saw and apply the basic cross cuts, here you will have the simple cutting through a job in a simple manner.
2. Angle Cuts
This feature is the second most demanded and required cut using a miter saw. The type of cut is also famous with the name miter cut. The angle cut is achieved by just turning the saw to one side of the other.
Most of the miter saw renders cutting through performance around 50-degree to the left and right. The expensive miter saw may offer a more extensive range, but professional woodworkers always prefer a limited range blade.
3. Bevel Cuts
Bevel cutting is not the most used type of cutting, and woodworkers rarely need to accomplish it. But, you are glad to have your miter saw that renders and achieves bevel cutting.
Bevel cutting is the process of cutting along the edge that is not perpendicular to the top of the object. The bevel cutting is carried out to increase the surface area of the edge to make an object stronger, secure, and safe.
You can achieve the cutting by moving the saw to left or right, and then set the angle of the saw cut. The type of cut is good for the complex angle, like a board span across two different planes.
Power source
Most of the miter saws available in the market nowadays are corded. They come up with motor power that provides them the power to get the job done.
They come with a motor power of 10-15 amp. The higher the amperage settings of a motor, the more powerful the performance it delivers.
If you are going to deal with hardwood or a heavy load of work, you will need a powerful motor to drive the blades at blazing speed. If you are dealing with thin wood, then you do not need to have a powerful motor and speed.
If you are the one who deals with the work at your location, service center, or home, a corded miter that takes power from the direct supply would get to go.
If you are the one who moves from one job site to the other, a cordless miter saw will help you a lot. Here you would not spend on trying to connect the device to a power source. In a cordless saw, you will have powerful batteries; they will help you go through your work for long hours.
Saw Weight
A miter saw weight is one of the primary features; a pro user would take it into count. Less-Weight products are easy to maneuver, transport from one location to the other, and easier to handle.
Like, if you want to get the job done in a remote location, it will be easier just to pick up the saw and start working at your location.
The large saw is difficult to maneuver. These might be good at working, but difficult to transport and you will have to take assistance to get is moved.
Laser Guides
In recent years much advancement has been made to make the miter saw stands out in the job. One of my favorite advanced features is the laser guide attachments.
The laser guide attachments come with a saw; the feature helps the user to see exactly where the blade is going to come down. With a laser guide system, the user gets more precise cuts, if you have to spend some extra, go for the feature.
The user should learn how the laser blade guide system works. The lasers are not attached to the blade; it is possible to make a mistake if you do not care.
Many users take a shortcut by an error in the absence of the laser guide, or sometimes the dead can malfunction. So, the nature of accuracy using a laser blade largely depends on the laser color, so learn it before using it.
Lockout Trigger
Lockout trigger is advanced and must look out feature in a miter saw. It is a switch on the handle that you depress to start the blade to spin on. It prevents accidental ignition of the miter saw, as a button just can be pressed on accidentally, lead to damage.
The trigger needs human interaction to the miter saw that you could not press on accidentally. To ignite the miter saw, you will have to power on the switch and depress the lockout trigger. If you do not lower the lockout trigger, the blade will not spin.
Safety Features
Safety clamps are an essential safety feature in a miter saw. The feature secures the lumbar while cutting, accidental slipping, or moving aborted using the safety clamps.
If the wood you are working on slips, the accident can happen and damage you or others around you. Safety clamps prevent this from occurring and keep the wood fixed in one location, allowing you to work on it without any slippage.
This feature also helps you achieve precise and measured cuts as per your demands. Accidental slipping can cut unwanted locations, spoiling the entire workpiece.
Electric brake
Electric brakes are one of the advanced and most sought-after features in a miter saw nowadays. Not all brands are coming up with the feature, yes, many top companies are coming with it.
For those who work at home and are more concerned about safety, the feature must be on board. The electric brakes stop the rotation of the blade abruptly. Like, if you see a bad incident is about to happen, let the trigger go, and it will stop the spinning blade.
When you turn off the miter saw, the blade that is spinning thousands of rotations per minute will take some moments actually to stop which can extend the incident duration. The abrupt stop of the blade will protect you from any damage.
Blade Guards
The blade guard is the must-have feature to look out in a miter saw. The guards are made to cover the outer edge of the blade. As the saw moves, any slippage or jerk can make you come in contact with the blade.
With the guard on, these incidents would not harm your hand; it is more like full-proof protection. The blade guards can be transparent and opaque; woodworkers, though prefer transparent as it let them see where the blade is cutting through.
Lock Trigger
The most modern miter saws have a locking trigger. The cutting-edge technology lets the designers help woodworkers to protect themselves in better ways.
The trigger on the handle needs to be depressed to start the blade spinning. With the lock trigger onboard, by pressing the power button, you would not have a spinning blade.
The miter saw will start, but blade rotation will require depressing the lock trigger. The feature helps the users not to get an accidental turned on the blade.
The unexpected motion can lead to injuries and other adverse events. You cannot turn on the lockout feature accidentally; it requires human interaction to depress. So, look out for the feature if you are into purchasing a more advanced miter saw.
Dust Collection System
I have seen people do not take this feature as a serious add-on. The debris collection or dust extraction system is a crucial feature to look out for when buying a miter saw.
The system prevents dust and debris from flying up your mouth, eyes, and ears. This system can lead to not seeing where you are cutting. The miter saw must acquire a dust collection system; it collects the dust extracted, and you will have tidy space around.
You need to learn how to attach it to your tool. With the tool on board, you will have a prolonged lifespan of your saw, as it will not mess up with other important parts of your saw.
Fence And Material Support
The primary use of the fence is to keep the workpiece on the line tight. You need to look for a good miter saw with reasonable fence control that could hold the material firmly with the fence. The sudden movement and not holding the material against the fence is hazardous because it can cause severe damage to the users.
The fences come with different heights, and some render more extensions for longer materials. If you are working on a mold or tall stack project, choose a miter saw that has a tall fence.
Onboard Storage
Miter saws are wonderful devices. They come with many removable components that are necessary to make the saw running at any location.
For example, you are going to work in a remote location, having your miter saw to get the project continued. Upon reaching the area, you come to know that some detachable components are missing, and you cannot work without them.
The onboard storage helps you have all your components collected in one spot. You can store these necessary components in a built-in storage feature that comes into an advanced miter saw.
Variable Speed Dials
The motor speed features let you control the motor speed. The variable speed dial option comes in very few miter saws but is worth having to control the speed of your saw.
As in carrying out different jobs, you may need varying speed blade rotation.
Final Verdict
Purchasing a new miter saw is a difficult task. It takes time, lots of struggle, and a good chunk of money. It is challenging to pick the right tool even after spending the whole savings.
To get the extra accessories onboard, you sometimes spend more than what ought to pay. Still, if you could grab an ideal tool falling right on your needs and requirements, the extra money is worth spending.
The myriad of choices and types of miter saws cause problems for even an expert. Every day we use to see an advanced feature hitting the tools, it becomes hard to decide which one to go with.
I hope the reviews of the miter saws will help narrow down your choices.
In our list, we have scoured some budget miter saws, general miter saws, powerful miter saws, and many more. We tried to provide tools for every category of users, and we are hopeful you like this effort.
FAQs About Miter Saw
What Are Some Excellent Tips For Getting A Clean Cut On A Miter Saw?
A good blade and right technique is the critical difference between a good and a bad cut. We have mentioned the types of blades and their usages.
You can give that a read and learn how the blade works and how blade thickness provides a safe and stable and accurate cut.
A right blade makes a fundamental difference and makes a miter saw stand out. The other vital tips are, clamp down your workpiece that will ensure accuracy and smoothness.
Another essential and experienced craftsman follows this trick to get a clean and smooth cut, place masking taps where you are going to cut.
To go through a hard word, ensure the blade is spinning at full speed, clean out the kerf, that’s all about getting a smooth, accurate cut.
What Is A Better Investment, A Miter Saw Or A Table Saw?
You know that a table saw is a flat table with a saw blade built into it. The table saw allows you to have a variety of different cuts for your job.
It has a circular saw blade that spins out from the surface of the table through a slit. The table is on a motor, and you can raise it above or low.
On the flip side, a miter saw is a circular blade fixed on a swing arm. The swingarm can be brought down on the lumbar to cut.
The concept of a miter saw is similar to a table saw, but a miter saw is meant to do some specific job. The table saw is suitable for the general purpose of woodcutting, woodworking.
The miter saw is good at carpentry, fine-tuning work, molding, crown and base molding, and much more. It is the usage that makes a difference.
You see, if you involve in lots of general wood-cutting, big wood pieces trimming, the table saw is an option to go with.
Can A 10-Inch Blade Be Used In A 12-Inch Miter Saw?Â
A vast majority of the people use 10 or 12 inches saw. That makes it hard to decide which option is right for them. The 10-inches blade spins faster than a 12-inch blade due to the lower radius.
Now, let’s come to our question back, yes a 10-inches blade can be used in a 12-inch miter saw, but there are few additional things you need to mark on.
If you install a 10-inch blade in a 12-inch miter saw, the cut may not reach the fence. You can have made it reach the fences by building up the thickness of the fence.
A good sled or precise miter bar can be another option to make the smaller diameter blade reaching through your work.
How Does A Circular Saw, Miter Saw, And Table Saw Differs?Â
A circular saw is a Job site tool to provide cutting performance on larger lumbar and dimensional lumbar. The saw is good at cutting anything, including metal and concrete.
A miter saw renders angular, beveled, and crosscuts. It is used to cut length at a 45-degree angle. The table saw can rip the lumbar or give crosscuts.
The other differences are the circular saw moves along the wood pieces to cut, the miter saw moves straight up and down, and a table saw does not move and you move the wood pieces across it.
Do I Need 10 inch Or 12-Inch Miter Saw?
It depends on your work. Let’s elaborate on this. A 10-inches blade spins faster than 12 inches. The less diameter makes them render more revolution per minute.
This diameter helps you in getting a smoother cut, and the blade also comes in various models, shapes, the 10-inches blade is a more popular option to go with.
On the other hand, 12 inches blade is considered useful to go for more extensive and thicker pieces of material. They require more power, more apps to get the required revolutions per minute.
The 12 inches blade, though, comes installed on a powerful miter saw, and they are used to accomplish a heavy load of work.
The rule of thumb is if you need to go through thicker pieces, go with a 12-inch model. If you are a DIYer, a 10-inch blade is a good option.